Loading product pictures. Please wait...
Watch this item
Product questions?
Search for distributors
on demand
Stock for approx. 12 wk(s)
Recommended retail price (RRP) excl. VAT
Prices in retail stores may vary.
Prices in retail stores may vary.
PLB-280 Moving Head Spot/Beam
PRO spot, beam and washlight Moving Head with 280 W discharge lamp
Item no. 51838966
- Equipped with an Osram Sirius HRI 280 W discharge lamp
- Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
- Supports RDM (Remote Device Management)
- High PAN/TILT speed
- 14, 16, 20 or 23 DMX channels selectable
- Spot, beam and due to the use of the frost filter also wash light in one device
- Color wheel with 13 different dichroic color filters plus white
- Rainbow effect with adjustable speed in both directions
- Effect wheel with rotating 6-facet linear prism, 8-facet prism and frost filter
- The prism rotate in both directions and at different speeds
- Gobo wheel 1 with 9 rotating gobos plus open
- All rotating gobos can be interchanged
- Slot-in gobo system for exchanging gobos without tools
- Gobo wheel 2 with 14 static gobos plus open
- With gobo shake function
- Strobe effect with adjustable speed
- Random strobe effect
- Motorized focus
- Autofocus
- Motorized zoom with 2 - 10° beam angle (Beam mode) and 5.5 - 23° beam angle (Spot mode)
- Dimmer
- PAN angle switchable between 540° and 630°
- Exact positioning via 16 bit PAN/TILT movement resolution
- Automatic position correction,
- Switch-mode power supply, automatic power supply adaption between 100 and 240 Volts without power selector
- ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
- Control board with graphic LCD for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
- DMX-controlled operation or stand-alone operation with master/slave function
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- With Osram Sirius HRI 280 W lamp
- Power connection via Neutrik PowerCon jack and included power cable
- DMX-control via any standard DMX-controller
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 360 W |
| DMX channels: | 14/16/20/23 |
| DMX connection: | 5-pin and 3-pin XLR |
| Flash-rate: | 20 Hz |
| Beam angle: | 2-10° (Beam mode), 5.5-23° (Spot mode) |
| Color-wheel: | 13 dichroic filters plus open |
| Rotating gobo-wheel: | 9 gobos and open |
| Outside diameter of the gobos: | 16 mm |
| Image diameter of the gobos: | 12 mm |
| Static gobo wheel: | 14 gobos and open |
| Maximum PAN-movement: | 630° |
| Maximum TILT-movement: | 270° |
| Dimensions (L x W x H): | 402 x 369 x 534 mm |
| Color: | Black |
| Weight: | 19 kg |
| Ecodesign regulation: | Yes |
| Special product: | Not designed for household room illumination |
| Purpose: | Show effect lighting |
| Lamp: | 1 x conventional with EEI C included. |
| PU | EAN | Weight | Dimensions |
|---|---|---|---|
| 1 | 4026397552058 | 21.650 kg | 77.5cm x 45cm x 35.5cm |
Your request was successful sent.
Please wait while the page is loading...
