PSSO Amp Set for Line Array L MK2

1 U

2 U

PSSO Amp Set for Line Array L MK2

The article is no longer in our assortment.

Item no. 11041067

Print product

Product badge

Features

Set consisting of:
2x 10451694: PSSO HSP-4000 MK2 SMPS Amplifier
2x 10451682: PSSO HSP-1000 MK2 SMPS Amplifier
2x 10451690: PSSO HSP-2800 MK2 SMPS Amplifier
1x 10356364: PSSO DXO-48 PRO Digital Controller

10451694 PSSO HSP-4000 MK2 SMPS Amplifier

Stereo PA amplifier with integrated SMPS, 2 x 2000 W

Stereo PA amplifier with class H circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity and limiter adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
LEDs for parallel and bridge mode
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units
(19") 48.3 cm rack installation 2 U

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

Stereo PA amplifier with integrated SMPS

Stereo PA amplifier with class H circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity and limiter adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
LEDs for parallel and bridge mode
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

Stereo PA amplifier with integrated SMPS, 2 x 1400 W

Stereo PA amplifier with class H circuitry
Low weight and height due to integrated switch mode power supply
Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
Limiter and speaker switch-on delay
3 operating modes can be selected (stereo, parallel or bridged)
2 calibrated level controls for precise level adjustment
Input sensitivity and limiter adjustable
LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
LEDs for parallel and bridge mode
Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
Highly efficient front-to-rear air routing
Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
Speaker outputs via lockable Speaker plugs and screw terminals
Rugged steel chassis with aluminum front panel
Rack installation with 2 units

10356364 PSSO DXO-48 PRO Digital Controller

Digital speaker management system with real-time network communication, 4 inputs and 8 outputs

Digital network speaker management system with 64-bit processing
Premium components ensure excellent sound-features
Flexible routing configurations for all standard mono and stereo output operating modes
4 analog inputs and 1digital AES/EBU interface (XLR)
8 analog outputs (XLR)
Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
10-band parametric EQ per input and output
Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
The intelligent software for PC and Mac allows convenient control with a computer
Full configuration and real-time network communication via the built-in Ethernet interface
Up to 80 user presets storable in the device via software
Control of all functions also possible via the controls at the front panel
Alphanumeric LCD screen with 2 lines of 16 characters each
Input sensitivity digitally adjustable
Inputs and outputs with 4-digit VU meter
Mute switch with LED indicator per output
Up to 2000 ms signal delay adjustable for the inputs and outputs
Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
Switchable phase (180°)
Lock function for protecting the program settings
Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
Control your speaker systems more flexible than ever with the DXO Control app
DXO Control for iPad supports all functions of the PC software and is available for free from the app store
Digital signal processor
The device can be connected via USB to the PC in connection with DXO Software; The device can be connected via RJ45 (F) mounting version to the PC in connection with DXO Software
The firmware can be updated via the PC connection
(19") 48.3 cm rack installation 1 U

Technical specifications

Weight:	70.35 kg
10451694 PSSO HSP-4000 MK2 SMPS Amplifier
Power supply:	230 V AC, 50 Hz
Power consumption:	2000.00 W 1/8 power
Output power:	2 x 1200 W RMS (8 ohms) 2 x 2000 W RMS (4 ohms)
Frequency range:	20 - 20000 Hz
Power connection:	Fixed Power supply cord with safety plug
Circuitry:	Class H
Housing design:	(19") 48.3 cm rack installation 2 U
Dimension:	Width: 48.3 cm Depth: 50.5 cm Height: 8.9 cm
Weight:	13.40 kg
Power output (RMS):
8 ohms bridged	1 x 4100 W
Signal-to-Noise ratio:	>80 dB
Total harmonic distortion:	<0.1 %
Damping factor:	>200
Voltage gain:	32 dB
Slew rate:	>20 V/µsec
Crosstalk:	>70 dB
Input sensitivity:	32 dB/1.0 V/0.775 V, switchable
Input impedance:	20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:	2 x XLR
Output connectors:	2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:	Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:	2 temperature-controlled fans, front-to-rear
Controls:	Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:	parallel, bridge (globally), protect, clip, signal (per channel)
Construction:	Steel chassis, aluminum front panel
	Rack installation with 2 U
10451682 PSSO HSP-1000 MK2 SMPS Amplifier
Power supply:	230 V AC, 50 Hz
Power consumption:	1000.00 W
Output power:	2 x 310 W RMS (8 ohms) 2 x 500 W RMS (4 ohms)
Frequency range:	20 - 20000 Hz
Circuitry:	Class H
Dimension:	Width: 48.3 cm Depth: 40 cm Height: 8.9 cm
Weight:	7.65 kg
Power output (RMS):
Stereo 4 ohms	2 x 500 W
Stereo 8 ohms	2 x 310 W
8 ohms bridged	1 x 1000 W
Signal-to-Noise ratio:	>80 dB
Total harmonic distortion:	<0.1 %
Damping factor:	>200
Voltage gain:	38 dB
Slew rate:	>20 V/µsec
Crosstalk:	>70 dB
Input sensitivity:	32 dB/1.0 V/0.775 V, switchable
Input impedance:	20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:	2 x XLR
Output connectors:	2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:	Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:	2 temperature-controlled fans, front-to-rear
Controls:	Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:	parallel, bridge (globally), protect, clip, signal (per channel)
Construction:	Steel chassis, aluminum front panel
	Rack installation with 2 U
10451690 PSSO HSP-2800 MK2 SMPS Amplifier
Power supply:	230 V AC, 50 Hz
Power consumption:	1500.00 W 1/8 power
Output power:	2 x 850 W RMS (8 ohms) 2 x 1400 W RMS (4 ohms)
Frequency range:	20 - 20000 Hz
Circuitry:	Class H
Dimension:	Width: 48.3 cm Depth: 50.5 cm Height: 8.9 cm
Weight:	12.90 kg
Power output (RMS):
Stereo 4 ohms	2 x 1400 W
Stereo 8 ohms	2 x 850 W
8 ohms bridged	1 x 3000 W
Signal-to-Noise ratio:	>90 dB
Total harmonic distortion:	<0.1 %
Damping factor:	>300
Voltage gain:	38 dB
Slew rate:	>20 V/µsec
Crosstalk:	>70 dB
Input sensitivity:	32 dB/1.0 V/0.775 V, swtichable
Input impedance:	20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:	2 x XLR
Output connectors:	2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:	Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:	2 temperature-controlled fans, front-to-rear
Controls:	Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:	parallel, bridge (globally), protect, clip, signal (per channel)
Construction:	Steel chassis, aluminum front panel
	Rack installation with 2 U
10356364 PSSO DXO-48 PRO Digital Controller
Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	10.00 W
Frequency range:	10 - 40000 Hz
THD:	<0.005 % at 1 kHz
Network connection:	Protocol: ethernet TCP/IP via 1x RJ45 (F) mounting version
DSP:	Digital signal processor
Power connection:	Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Crossover frequency:	20-20000 Hz
Impedance:	Input 10 kOhm Input XLR (AES/EBU): 110 Ohm Output 50 Ohm
Gain:	Input: -50 dB to +12 dB Output: -50 dB to +12 dB
Filter:	Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
Delay:	0 - 2000 ms
Dynamic range:	Input: 118 dB Output: 114 dB
Sample rate:	65 kHz
Connections:	Input: 4 x line via 3-pin XLR Output: 8 x line via 3-pin XLR
Max. level:	Input: +22 dBu Output: +12 dBu
USB port:	Typ B
PC connect:	DXO Software via USB; DXO Software via RJ45 (F) mounting version, firmware can be updated
Housing design:	(19") 48.3 cm rack installation 1 U
Dimension:	Width: 48.3 cm Depth: 18.0 cm Height: 4.45 cm
Weight:	2.45 kg

Packaging units

PU	EAN	Weight	Dimensions
1	4026397592726

Accessories

Loading accessories. Please wait...

Support

Spare parts

Loading spareparts. Please wait...

Downloads