Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Сортировать
Товаров на странице:
1 2
This product has the successor:
OMNITRONIC XPA-350 Amplifier

OMNITRONIC  E-200 MK2 Amplifier

Арт. № 10451051
Свойства
Технические данные

Stereo PA amplifier with integrated limiter

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:115 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 100 W
Stereo 8 ohms2 x 60 W
8 ohms bridged1 x 200 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:40 V/µsec
S/N ratio:>90 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:8 kg
139,00 
будет в наличии до 11 недели
This product has the successor:
OMNITRONIC XPA-2700 Amplifier

OMNITRONIC  E-2000 MK2 Amplifier

Арт. № 10451069
Свойства
Технические данные

Stereo PA amplifier with integrated limiter

  • Class AB circuitry
  • 3 operating modes can be selected (stereo, parallel bridged)
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Selectable input sensitivity
  • Fan cooling
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Signal inputs via XLR or 6.3 mm mounting jacks
  • Additional Speaker plug for 8-ohm bridge operation
  • 8-ohm bridge operation via screw terminals or additional Speaker plug
  • Rack installation
Power supply:230 V AC, 50 Hz
Power consumption:1700 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 1000 W
Stereo 8 ohms2 x 650 W
8 ohms bridged1 x 2000 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>250
Distortion factor:0.1 %
Slew rate:30 V/µsec
S/N ratio:>90 dB
Input sensitivity:0.77 V/1.0 V/1.4 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 6.3 mm jack
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals
Control elements: power switch, level control per channel, mode switch, limiter switch, groundlift switch, input sensitivity switch
Protection circuits: short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):425 x 482 x 106 mm (19", 2 U)
Weight:15.5 kg
РАСПРОДАЖА 19 % СКИДКИ
Акция с 30.09.2016 по 31.12.2017
435,00 €
349,00 
будет в наличии до 12 недели
This product has the successor:
OMNITRONIC XPA-700 Amplifier

OMNITRONIC  E-600 MK2 Amplifier

Арт. № 10451061
Свойства
Технические данные

Stereo PA amplifier with integrated limiter 2 x 300 W/4 ohms

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:327 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 300 W
Stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:45 V/µsec
S/N ratio:>100 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:10 kg
199,00 
в наличии только несколько штук
Интересная альтернатива, пожалуйста, посмотрите!
OMNITRONIC XPA-1800 Amplifier

PSSO  HP-1400 Amplifier

Арт. № 10451650
Свойства
Технические данные

High-power amplifier 2 x 700 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:740 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 700 W
Stereo 8 ohms2 x 400 W
8 ohms bridged1 x 1400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:17 kg
485,00 
будет в наличии до 12 недели
Интересная альтернатива, пожалуйста, посмотрите!
OMNITRONIC XPA-2700 Amplifier

PSSO  HP-2400 Amplifier

Арт. № 10451651
Свойства
Технические данные

High-power amplifier 2 x 1200 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:1300 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1200 W
Stereo 8 ohms2 x 690 W
8 ohms bridged1 x 2400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:22 kg
РАСПРОДАЖА 34 % СКИДКИ
Акция с 20.01.2017 по 31.12.2017
699,00 €
461,34 
будет в наличии до 12 недели

OMNITRONIC  MCP-4150 4-Channel Amplifier

Арт. № 10452410
Свойства
Технические данные

4-channel PA amplifier with integrated limiter 4 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 4 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:900 W
Power output sine:
4 ohms:4 x 150 W
8 ohms:4 x 100 W
8 ohms bridged:2 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:102 dB
Channel separation (at 1 kHz):61 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:4 x XLR female, 4 x terminal block
Output connectors:4 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:16 kg
399,00 
будет в наличии до 12 недели

OMNITRONIC  MCP-6150 6-Channel Amplifier

Арт. № 10452420
Свойства
Технические данные

6-channel PA amplifier with integrated limiter 6 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 6 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1400 W
Power output sine:
4 ohms:6 x 150 W
8 ohms:6 x 100 W
8 ohms bridged:3 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:97 dB
Channel separation (at 1 kHz):51 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:6 x XLR female, 6 x terminal block
Output connectors:6 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:17.5 kg
449,00 
будет в наличии до 12 недели

OMNITRONIC  MCP-8150 8-Channel Amplifier

Арт. № 10452430
Свойства
Технические данные

8-channel PA amplifier with integrated limiter 8 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 8 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1850 W
Power output sine:
4 ohms:8 x 150 W
8 ohms:8 x 100 W
8 ohms bridged:4 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:90 dB
Channel separation (at 1 kHz):51 dB
Min. input sensitivity:0.77 V
Slew rate:>30 V/µsec
Input impedance:12 kohms (unbalanced), 22 kohms(balanced)
Input connectors:8 x XLR female, 8 x terminal block
Output connectors:8 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:19 kg
515,00 
будет в наличии до 12 недели

OMNITRONIC  MCS-1250 MK2 6-Zone PA Amplifier

Арт. № 10452480
Свойства
Технические данные

6-zone audio amplifier with matrix assignment, 2 x 50 W pro zone

  • 6-zone stereo amplifier for multi-zone PA applications
  • Updated version with touch pad wall controller
  • 12 x 50 W/4 ohms per zone
  • Bridge mode with 100 W/8 ohms individually selectable per zone
  • Efficient Class D technology
  • 6 stereo inputs expandable to 18 stereo zones with further units
  • Matrix input assignment: input sources are freely assignable to each channel
  • 6 pre-amp outputs to connect external power amplifiers
  • Convenient control via touch pad wall controller or IR remote control
  • Incl. 6 wall controllers with touch-sensitive surface (touch pad), LCD with blue backlight and IR receiver
  • Wall controller allows selecting the audio source and volume, treble, bass adjustment for each zone individually
  • Incl. wall hub for up to 6 wall controllers
  • Incl. IR remote control
  • Signal inputs: 4 x stereo RCA, 2 x 3.5 mm jack and 1 x Toslink for digital audio signals
  • Speaker connection via terminal blocks
  • 6 zone status indicators on the front panel
  • Automatic gain control selectable for level matching of signal sources
  • Terminals for IR emitters (accessory) allow extending the IR signals from the remote controls of the signal sources
  • RS232 port enables two-way communication with a home automation system
  • Trigger input for muting
  • 6 trigger outputs for switching external amplifiers
  • Rack installation with 2 U
Power supply:230 V AC, 50 Hz
Power consumption:1250 W
Output power sine:
Stereo 4 ohms:2 x 50 W per zone
Stereo 8 ohms:2 x 25 W per zone
8 ohms bridged:6 x 100 W
Frequency range:20-20000 Hz
Distortion:0.1 % (1 kHz)
S/N ratio: 85 dB
Input sensitivity:250 mV
Input impedance:>47 kohms
Inputs:
1-4:RCA L/R
5:3.5 mm stereo jack
6:3.5 mm stereo jack and Toslink
Speaker connectors:Terminal block
Output hub/keypad:RJ-45
Home automation interface:RS-232
Muting:12 V DC, via 3.5 mm mono jack
Trigger output:12 V DC, via 3.5 mm mono jack
IR emitter connectors:12 V DC, via 3.5 mm mono jack
LED indicators (per channel):standby/on, peak
Protection circuits:short-circuit, overheat, overload
Dimensions:482 x 420 x 102 mm (19", 2 U)
Weight:13 kg
1.199,00 
будет в наличии до 12 недели

OMNITRONIC  MCS-1250 MK2 Hub

Арт. № 10452484
Свойства
Технические данные

MCS-1250 MK2 hub

  • Hub for connecting up to 6 wall controllers to the amplifier MCS-1250 MK2
  • Surface mounting
  • Accessory - 1 piece comes with each amplifier
49,90 
будет в наличии до 12 недели
1 2
Вы уже просмотрели
Ваш запрос успешно отправлен.
Loader
Страница загружается...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use