Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Seleção
Produtos por página:
1 2 ... 5

PSSO  CLA-228 MK2 LINE ARRAY Top

núm. art. 11040901
características
dados tecnicos

Compact line array top

  • Improved MKII version with BEYMA-drivers
  • Compact line array for permanent installations and touring purposes
  • Time saving 2-man installation directly from the transport case
  • Lightweight housing due to high-quality plastic
  • Low weight of the whole construction and reduced demands for the flying points
  • Elegant housing design for avoiding resonance and standing waves
  • Two powerful 20 cm low/mid neodymium magnets (2 x 8")
  • 4.4 cm neodymium driver (1.73") with titanium diaphragm
  • Specially designed waveguide
  • Maximum efficiency due to biamped control
  • Wide horizontal dispersion angle of 100°
  • Curving adjustable between 0° and 12°
  • Easy rigging with captive quick release pins
  • Tight locking pins eliminating vibration noise
  • Flying hardware regularly tested by an independent and accredited testing institute
MF rated power:300 W RMS
HF rated power:60 W RMS
MF program power:600 W
HF program power:120 W
Components:2 x 20 cm woofer (2 x 8"), 4.4 cm driver (1.73")
Connection: 2 Speakon sockets (4-pin)
MF sensitivity:96 dB (1 W, 1 m)
HF sensitivity:104 dB (1 W, 1 m)
MF max. SPL:123 dB (1 m)
HF max. SPL:124 dB (1 m)
Impedance:MF 16 ohms / HF 8 ohms
Frequency range:68-20000 Hz
Crossover frequency:1.8 kHz
Dispersion angle (1 kHz):H=100°, V=3°
Dimensions (HxWxD):285 x 670 x 285 mm
Weight:19 kg
Shipping weight:21.85 kg
779,00 
estoque para 12 sem.

PSSO  CSA-218A top, active, black

núm. art. 11040817
características
dados tecnicos

Pro active PA speaker system with biamp amplifier, 230 W

  • Active full-range top speaker, qualified for suspension
  • For permanent installations and touring purposes
  • Class D biamp power amplifier (230 W)
  • Efficient, light-weight switch mode power supply with energy saving mode
  • Light-weight cabinet due to high-quality special plastic (9 kg only)
  • Elegant housing design
  • 20 cm (8") bass speaker and 3.5 cm (1.34") titanium compression horn driver
  • 90° x 90° nominal coverage
  • Balanced XLR input
  • Speaker flange for mobile use included in the delivery
  • PowerCon mains input
  • Applications: as monitor, on a subwoofer or speaker stand, suspended
  • Matching mounting brackets and flying hardware available as accessories
Rated power:230 W
Components:HF: 3.5 cm (1.34"), LF: 20 cm (8")
Frequency range:70-18000 Hz
Crossover frequency:2.5 kHz
Dispersion angle (HxV):90° x 90°
Maximum SPL:113 dB
Acoustic loading:Bassreflex
Cabinet material:HIPS
Amplifier:Class D
THD:<0.05 %
S/N ratio:>80 dB
Damping factor:>50
Input sensitivity:2 V
Input impedance:40 kohms/20 kohms (bal./unbal.)
Signal input:XLR
Power supply:100-240 V AC, 50/60 Hz
Power consumption:350 W
Protection circuits:Limiter, overheat, overload, short-circuit
LED indicators:Power, clip
Weight:10 kg
Shipping weight:12.25 kg
Campaign from 4 pcs. savings 32%
campanha de 19.01.2017 até 31.12.2017
Your price from
449,00 €
302,52 
estoque para 12 sem.

PSSO  CSA-218B top, black

núm. art. 11040804
características
dados tecnicos

Compact speaker array

  • Compact speaker array for touring purposes and permanent installations
  • Speaker flange for mobile use included in the delivery
  • Mounting bracket for permanent installation can be ordered separately
  • Lightweight housing due to high-quality special plastic
  • Wide dispersion angle: 90° horizontally and vertically
Rated power:150 W RMS
Program power:300 W
Components:20 cm mids speaker (8"), 3.5 cm driver (1.33")
Connection: 2 Speaker sockets (4-pin)
Sensitivity:92 dB (1 W, 1 m)
Maximum SPL:113 dB (1 m)
Impedance:8 ohms
Frequency range:70-18000 Hz
Crossover frequency:2.5 kHz
Dispersion angle (1 kHz):H=90°, V=90°
Dimensions (HxWxD):250 x 465 x 340 mm
Weight:9 kg
Shipping weight:11.30 kg
359,00 
estoque para 12 sem.

PSSO  CSA-228A top, active, black

núm. art. 11040815
características
dados tecnicos

Pro active PA speaker system with biamp amplifier, 450 W

  • Active full-range top speaker, qualified for suspension
  • For permanent installations and touring purposes
  • Class D biamp power amplifier (450 W)
  • Efficient, light-weight switch mode power supply with energy saving mode
  • Light-weight cabinet due to high-quality special plastic (15 kg only)
  • Elegant housing design
  • 2 x 20 cm (8") bass speaker and 3.5 cm (1.34") titanium compression horn driver
  • 90° x 40° nominal coverage
  • Balanced XLR input
  • Speaker flange for mobile use included in the delivery
  • PowerCon mains input
  • Applications: as monitor, on a subwoofer or speaker stand, suspended
  • Matching mounting brackets and flying hardware available as accessories
Rated power:450 W
Components:HF: 3.5 cm (1.34"), LF: 2 x 20 cm (8")
Frequency range:70-18000 Hz
Crossover frequency:2.5 kHz
Dispersion angle (HxV):90° x 40°
Maximum SPL:119 dB
Acoustic loading:Bassreflex
Cabinet material:HIPS
Amplifier:Class D
THD:<0.05 %
S/N ratio:>80 dB
Damping factor:>50
Input sensitivity:2 V
Input impedance:40 kohms/20 kohms (bal./unbal.)
Signal input:XLR
Power supply:100-240 V AC, 50/60 Hz
Power consumption:550 W
Protection circuits:Limiter, overheat, overload, short-circuit
LED indicators:Power, clip
Weight:16 kg
Shipping weight:18.60 kg
Promoção 30 % desconto
campanha de 20.01.2017 até 31.12.2017
649,00 €
452,94 
estoque para 4 sem.

PSSO  CSA-228B top, black

núm. art. 11040800
características
dados tecnicos

Compact speaker array

  • Compact speaker array for touring purposes and permanent installations
  • Speaker flange for mobile use included in the delivery
  • Mounting bracket for permanent installation can be ordered separately
  • Lightweight housing due to high-quality plastic
  • Wide horizontal dispersion angle
Rated power:300 W RMS
Program power:600 W
Components:2 x 20 cm mids speaker (2 x 8"), 3.5 cm driver (1.33")
Connection: 2 Speaker sockets (4-pin)
Sensitivity:95 dB (1 W, 1 m)
Maximum SPL:119 dB (1 m)
Impedance:8 ohms
Frequency range:75-18000 Hz
Crossover frequency:2.5 kHz
Dispersion angle (1 kHz):H=90°, V=40°
Dimensions (HxWxD):250 x 665 x 340 mm
Weight:15 kg
Shipping weight:17.10 kg
Promoção 39 % desconto
campanha de 20.01.2017 até 31.12.2017
495,00 €
298,31 
poucas unidades disponíveis

PSSO  EVENT Set

núm. art. 11041064
características
dados tecnicos

11041096 PSSO K-215DPX 2-Way Top 1000W

    Pro PA speaker system
  • Rugged full-range top speaker, qualified for suspension and touring applications
  • Housing made of 20 mm birch plywood with steel corners
  • Transport wheels
  • 2 x 38 cm (15") bass speaker with diecast aluminum basket
  • Rotatable constant directivity horn tweeter
  • Horn exit 25 mm (1")
  • Voice coil 50 mm (2")
  • Premium custom-made drivers by European manufacturer CELTO Acoustique
  • Premium passive 2-way crossover
  • Bassreflex system
  • Parallel Neutrik Speakon connectors
  • Trapezoidal multi-functional housing with scratch-resistant lacquer surface
  • Impact-resistant steel grille with acoustic foam
  • Applications: standing, on a subwoofer, suspended

10451686 PSSO HSP-2100 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

30227915 PSSO Speaker cable Speakon 2x2.5 15m bk

    High-quality speaker cable
  • With Neutrik plugs from Liechtenstein
  • Cable from German production
  • 2-pin speaker cable
  • With Neutrik Speakon cable plugs
  • Cable cross-section: 2.5 mm²
  • Cable length: 15 m
  • Cable diameter: 8 mm
  • Weight: 1.5 kg
  • Made in Germany
Shipping weight:128.30 kg

11041096 PSSO K-215DPX 2-Way Top 1000W

Rated power:1000 W RMS
Components:2 x 38 cm woofer (15"), 2.5 cm horn (1")
Connection: 2 x Speakon
Sensitivity:100 dB (1 W, 1 m)
Maximum SPL:136 dB (1 m)
Impedance:4 ohms
Frequency range:44-19000 Hz
Crossover frequency:1.6 kHz
Dispersion angle (HxV):70° x 50°
Dimensions (HxWxD):1170 x 465 x 478 mm
Weight:52 kg

10451686 PSSO HSP-2100 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1050 W
Stereo 8 ohms2 x 650 W
8 ohms bridged1 x 2200 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:10 kg

30227915 PSSO Speaker cable Speakon 2x2.5 15m bk

Cable length:15 m
Color:Black
Plug A:1 x 2-pole Speakon (M)
Plug B:1 x 2-pole Speakon (M)
2.199,00 
Este item não está disponível

PSSO  K-208 2-Way Top 200W

núm. art. 11041098
características
dados tecnicos

Pro PA speaker system

  • Rugged full-range top speaker, qualified for suspension and touring applications
  • Housing made of 15 mm birch plywood
  • 20 cm (8") bass speaker with diecast aluminum basket
  • Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
  • Premium custom-made drivers by European manufacturer CELTO Acoustique
  • Passive 2-way crossover
  • Bassreflex system
  • Parallel Neutrik Speakon connectors
  • M10 thread for Omnimount wall brackets
  • Adapter for stand installation available as accessory (SPA-10L)
  • Trapezoidal multi-functional housing with scratch-resistant lacquer surface
  • Impact-resistant steel grille with acoustic foam
  • Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
Rated power:200 W RMS
Components:20 cm woofer (8"), 2.5 cm horn (1")
Connection: 2 x Speakon
Sensitivity:95 dB (1 W, 1 m)
Maximum SPL:124 dB (1 m)
Impedance:8 ohms
Frequency range:57-20000 Hz
Crossover frequency:1.8 kHz
Dispersion angle (HxV):90° x 60°
Dimensions (HxWxD):270 x 445 x 270 mm
Weight:12 kg
Shipping weight:13.75 kg
Promoção 16 % desconto
campanha de 27.07.2017 até 31.08.2017
315,00 €
264,71 
estoque para 12 sem.

PSSO  K-210 2-Way Top 300W

núm. art. 11041100
características
dados tecnicos

Pro PA speaker system

  • Rugged full-range top speaker, qualified for suspension and touring applications
  • Housing made of 15 mm birch plywood
  • 25 cm (10") bass speaker with diecast aluminum basket
  • Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
  • Premium custom-made drivers by European manufacturer CELTO Acoustique
  • Passive 2-way crossover
  • Bassreflex system
  • Parallel Neutrik Speakon connectors
  • Trapezoidal multi-functional housing with scratch-resistant lacquer surface
  • Impact-resistant steel grille with acoustic foam
  • Flange for stand installation
  • Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
Rated power:300 W RMS
Components:25 cm woofer (10"), 2.5 cm horn (1")
Connection: 2 x Speakon
Sensitivity:96 dB (1 W, 1 m)
Maximum SPL:127 dB (1 m)
Impedance:8 ohms
Frequency range:55-19000 Hz
Crossover frequency:2 kHz
Dispersion angle (HxV):90° x 60°
Dimensions (HxWxD):340 x 540 x 320 mm
Weight:18 kg
Shipping weight:19.30 kg
Promoção 16 % desconto
campanha de 27.07.2017 até 31.08.2017
345,00 €
289,92 
disponível em 9 sem.

PSSO  K-212 2-Way Top 300W

núm. art. 11041104
características
dados tecnicos

Pro PA speaker system

  • Rugged full-range top speaker, qualified for suspension and touring applications
  • Housing made of 15 mm/18 mm birch plywood
  • 30 cm (12") bass speaker with diecast aluminum basket
  • Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
  • Premium custom-made drivers by European manufacturer CELTO Acoustique
  • Passive 2-way crossover
  • Bassreflex system
  • Parallel Neutrik Speakon connectors
  • Trapezoidal multi-functional housing with scratch-resistant lacquer surface
  • Impact-resistant steel grille with acoustic foam
  • Flange for stand installation
  • Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
Rated power:300 W RMS
Components:30 cm woofer (12"), 2.5 cm horn (1")
Connection: 2 x Speakon
Sensitivity:97 dB (1 W, 1 m)
Maximum SPL:128 dB (1 m)
Impedance:8 ohms
Frequency range:55-19000 Hz
Crossover frequency:1.9 kHz
Dispersion angle (HxV):90° x 60°
Dimensions (HxWxD):347 x 660 x 352 mm
Weight:19 kg
Shipping weight:21.50 kg
385,00 
disponível em 9 sem.

PSSO  K-215 2-Way Top 400W

núm. art. 11041108
características
dados tecnicos

Pro PA speaker system

  • Rugged full-range top speaker, qualified for suspension and touring applications
  • Housing made of 15 mm/18 mm birch plywood
  • 38 cm (15") bass speaker with diecast aluminum basket
  • Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
  • Premium custom-made drivers by European manufacturer CELTO Acoustique
  • Passive 2-way crossover
  • Bassreflex system
  • Parallel Neutrik Speakon connectors
  • Trapezoidal multi-functional housing with scratch-resistant lacquer surface
  • Impact-resistant steel grille with acoustic foam
  • Flange for stand installation
  • Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
Rated power:400 W RMS
Components:38 cm woofer (15"), 2.5 cm horn (1")
Connection: 2 x Speakon
Sensitivity:98 dB (1 W, 1 m)
Maximum SPL:130 dB (1 m)
Impedance:8 ohms
Frequency range:47-19000 Hz
Crossover frequency:1.7 kHz
Dispersion angle (HxV):80° x 50°
Dimensions (HxWxD):710 x 445 x 415 mm
Weight:26 kg
Shipping weight:28.60 kg
Promoção 16 % desconto
campanha de 27.07.2017 até 31.08.2017
435,00 €
365,55 
estoque para 12 sem.
1 2 ... 5
Último produtos visualizados
Your request was successful sent.
Loader
Please wait while the page is loading...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use