CobraNet(TM) audio network transmitter
OMNITRONIC NAT-412 Audio transmitter

CobraNet(TM) audio network transmitter-MainBild

CobraNet(TM) audio network transmitter

OMNITRONIC NAT-412 Audio transmitter

The article is no longer in our assortment.

No. 10356470

Here you find the manual and downloads for
OMNITRONIC NAT-412 Audio transmitter

CobraNet(TM) Audio network technology

Developed by Peak Audio, CobraNet(TM) technology allows real-time uncompressed digital audio distribution over industry standard 100Base-T Ethernet networks. Based on the Ethernet-MAC-protocol, it is possible to reach an isochronous, i. e. a highly reliable datastream with very low latency and a bandwidth of 100 Mbit/s.

CobraNet(TM) technology allows the transport of isochronous datastreams required by audio and video applications in 10 and 100 MBit Ethernet networks where an upgrade to e.g. 1 GBit is always possible. Additionally, CobraNet(TM) technology can carry asynchronous control data without conflict to the isochronous data.

Up to 64 channels (20 Bit/48 kHz) can be carried simultaneously over a category 5 cable. CobraNet(TM) currently supports a 48 kHz sampler frequency with a 16, 20, or 24 bitrate. A respectively configured network can handle up to 3000 audio channels. When using category 5 cables, a maximum cable-length of 100 m should not be exceeded.

As CobraNet(TM) consists of standard Ethernet-components available in the IT retail business, high quality products can be bought at a competitive price.

CobraNet(TM) devices can coexist with networked computers, printers, etc. on a switched 100Base-T Ethernet network, however, a dedicated network infrastructure is strongly recommended.

Features

CobraNet(TM) audio network transmitter

Real-time audio transmission of the CobraNet(TM) signal
4 analog input channels (bal.)
12 analog input channels (bal.)
CobraNet(TM) and Ethernet connection port
Independent MCU control for running the transmitter without a PC
Every channel can be controlled independently
Firmware can be updated via RS-232 port
All setup parameters can be stored in permanent flash memory
Redundant network connection
Operation possible without PC after configuration
Automatic ajdustment to regional power supply systems
Transmission of up to 64 channels (20 bit/48 kHz) via category 5 cable
48 kHz sampler frequency with a bitrate of 20
Maximum cable length 100 m (category 5 cables)
Incl. mounting brackets for 483 mm rack installation (19") (2 U)

Technical specifications

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	30.00 W
Dimensions:	Width: 43 cm Depth: 33 cm Height: 8.9 cm
Weight:	7.3 kg
DSP capability:	200 MIPS, 40 bit floating point
2 RJ-45 network connectors:	according to IEEE 802.3 standards
2 RS-232 connectors:	type D (9 pins)
Analog audio inputs:
Number of channels:	4 (XLR, bal.)
Sampler frequency:	48 kHz
Quantization resolution:	20 Bit
THD:	0.005 % (+4 dBu)
Dynamic range:	103 dBA
Input gain adjustment:	0-66 dBu
Maximum input level:	+21 dBu (bal.)
Input impedance:	20 kohms
Analog audio outputs:
Number of channels:	12 (XLR, bal.)
Sampler frequency:	48 kHz
Quantization resolution:	20 bit
Frequency range:	20-20000 Hz, ±0.2 dB
THD:	0.005 % (+4 dBu)
Dynamic range:	103 dBA
Maximum output level:	+21 dBu (bal.)
Output impedance:	100 ohms
Dimensions:	430 x 89 x 330 mm
	Rack installation with 2 U with brackets

Packaging units

PU	EAN	Weight	Dimensions
1	4026397280807	9,30 kg	55cm x 46cm x 24cm

Support

Spare parts

No spare parts available.

Downloads

Loading the documents. Please wait...

Manufacturer information

Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5
D-97297 Waldbüttelbrunn

+49 931 4061 600
info@steinigke.de
www.steinigke.de/support

CobraNet(TM) audio network transmitterOMNITRONIC NAT-412 Audio transmitter

CobraNet(TM) audio network transmitterOMNITRONIC NAT-412 Audio transmitter

CobraNet(TM) audio network transmitter
OMNITRONIC NAT-412 Audio transmitter

CobraNet(TM) audio network transmitter

OMNITRONIC NAT-412 Audio transmitter