Artnet and USB interface for output of 2048 channels
MADRIX LUNA 4 Port USB / Art-Net Node

1 U

Artnet and USB interface for output of 2048 channels

MADRIX LUNA 4 Port USB / Art-Net Node

Stock for approx. 12 wk(s)

Priceon demand

Find a dealer

List price excl. 19% VAT
Prices in retail stores may vary.

Item no. 70064844

Print product

Product badge

Here you find the manual and downloads for
MADRIX LUNA 4 Port USB / Art-Net Node

MADRIX LUNA

The easy-to-use and reliable network node.

The MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB.

Art-Net / Streaming ACN / USB

Art-Net or Streaming ACN data is directly converted to DMX512. Optimize and decentralize cabling to cover any distance to the device using Ethernet network.

4/8/16 DMX-OUT + 1 DMX-IN

4, 8, or 16 XLR ports (5-pin, female) distribute the corresponding number of DMX universes per unit. 1 XLR port (5-pin, male) can be used for DMX input. You can use several units at the same time for larger projects.

Benefits

Any project greatly benefits from dependable data distribution and efficient operation. With MADRIX LUNA, you can use any compatible software or hardware controller. In addition, you can connect to MADRIX 5 via USB.

Sync mode

The software MADRIX 5 and the MADRIX hardware allow you to fully synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions.

Easy Configuration

MADRIX LUNA offers powerful features, especially in combination with MADRIX 5. Take full advantage of pixel mapping and voxel mapping. The configuration of the device is quick and easy.

3rd-party controllers

MADRIX LUNA complies with the official protocol specifications and can be used as a regular node with your other consoles, controllers, or software solutions.

High Quality Design

Devices are built 19″ x 1U or 19″ x 2U. They feature a fanless, noiseless, low-energy design, a durable metal case, and NEUTRIK plugs. 2 premounted brackets make rack mounting possible. 5 indicators quickly show the status of a device.

Upgradable firmware

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable for future enhancements. You can access and change specific device settings conveniently using the built-in web configuration page.

Did You Know?

When MADRIX LUNA is used as a receiving unit, the 100 MBit/s RJ45 Ethernet connection is more than enough. For particularly large projects, we recommend to use Art-Net and 1 GBit/s for the network switch and network card. For the sender of all the data, a higher bandwidth is required. Often, Art-Net data is sent in broadcast mode, where all receivers get all the data. With MADRIX 5 however, we also support unicast mode to just sent the required data to the single units to save bandwidth. In all cases, MADRIX LUNA provides the performance you need.

Connectivity

• 4x/8x/16x DMX-OUT
• 1x DMX-IN
• 1x RJ45 Ethernet port
• 1x USB port
• 1x Power socket

Package Contents

• 1x MADRIX LUNA
• 1x Power cord (IEC C13)
• 1x USB 2.0 cable (certified)
• 2x Rack-mount brackets (already mounted to the device)
• 1x Technical manual / quick start guide

Features

Artnet and USB interface for output of 2048 channels

Can receive and process up to 512 DMX channels
Can transmit up to 2048 DMX channels
The device is cooled by passive convection cooling
Control via ArtNet
Built with NEUTRIK connector
The device can be connected via USB to the PC
(19") 48.3 cm rack installation 1 U
Made in Germany
The device can be connected via RJ-45 etherCON (F) mounting version to the PC
For further information about this product, please refer to the Data Sheet under "Downloads"

Technical specifications

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	5,00 W
IP classification:	IP20
Protection class:	Protection class I
Power connection:	Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
DMX channels:	Input 512 Output 2048
DMX input:	1 x 5-pin XLR (M) mounting version
DMX output:	4 x 5-pin XLR (F) mounting version
Network connection:	1x RJ-45 etherCON (F) mounting version
Cooling:	Passive convection cooling
Control:	ArtNet
USB port:	USB 2.0, Typ B
Use of brands:	Built with NEUTRIK connector
PC connect:	Via USB Via RJ-45 etherCON (F) mounting version
Housing design:	(19") 48.3 cm rack installation 1 U
Dimensions:	Width: 48,3 cm Depth: 7,6 cm Height: 4,45 cm
Weight:	1,63 kg

Packaging units

PU	EAN	Weight	Dimensions
1	4260263421141	1,98 kg	54,5cm x 17cm x 6cm
10	4026397521474	20,80 kg	60cm x 40cm x 42cm

Support

Spare parts

No spare parts available.

Downloads

Loading the documents. Please wait...

Artnet and USB interface for output of 2048 channelsMADRIX LUNA 4 Port USB / Art-Net Node

Artnet and USB interface for output of 2048 channelsMADRIX LUNA 4 Port USB / Art-Net Node

The easy-to-use and reliable network node.

Artnet and USB interface for output of 2048 channels
MADRIX LUNA 4 Port USB / Art-Net Node

Artnet and USB interface for output of 2048 channels

MADRIX LUNA 4 Port USB / Art-Net Node