Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Ταξινόμηση
Προϊόντα ανά σελίδα:
1

OMNITRONIC  DJP-700 Class D Amplifier

Αριθμός υλικού 10451601
Χαρακτηριστικά
Τεχνικές πληροφορίες

Compact stereo mixing amplifier 2 x 300 W

  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
Shipping weight:2.76 kg
169,00 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  DJP-700P Class D Amplifier

Αριθμός υλικού 10451602
Χαρακτηριστικά
Τεχνικές πληροφορίες

Compact stereo mixing amplifier with audio player and Bluetooth 2 x 300 watts

  • Compact stereo mixing amplifier 2 x 300 watts
  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Built-in audio player with Bluetooth receiver
  • Stream music wirelessly from your mobile devices (e.g. smartphone, tablet) via Bluetooth
  • USB 2.0 input and SD card slot
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
Audio player:
Playback format:MP3, WMA, WAV
Available storage media:USB devices and SD(HC) cards up to 32 GB
File system:FAT16/32
Bluetooth:
Carrier frequency:2.4 GHz
Range:approx. 10 m
Shipping weight:2.76 kg
189,00 
Δεν είναι διαθέσιμο στην αποθήκη
This product has the successor:
OMNITRONIC XDA-1002 Class D Amplifier

OMNITRONIC  EDP-1000 Class D Amplifier

Αριθμός υλικού 10451614
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 550 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:1000 W
Power output sine:
stereo 4 ohms2 x 550 W
stereo 8 ohms2 x 300 W
8 ohms bridged1 x 1100 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>200
Distortion factor:0.05 %
Slew rate:20 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker (L/R), 1 x Speaker (bridge)
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal level (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
Shipping weight:5.02 kg
299,00 
Επαρκές απόθεμα για 9 εβδομάδες

OMNITRONIC  EDP-300 Class D Amplifier

Αριθμός υλικού 10451610
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 180 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:400 W
Power output sine:
stereo 4 ohms2 x 180 W
stereo 8 ohms2 x 100 W
8 ohms bridged1 x 360 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>200
Distortion factor:0.05 %
Slew rate:20 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker (L/R), 1 x Speaker (bridge)
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal level (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
Shipping weight:5.00 kg
225,00 
Επαρκές απόθεμα για 8 εβδομάδες

OMNITRONIC  EDP-3600 Class D Amplifier

Αριθμός υλικού 10451615
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 1700 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:1050 W (1/8 power)
Power output (RMS):
stereo 4 ohms2 x 1700 W
stereo 8 ohms2 x 1000 W
8 ohms bridged1 x 3600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>250
Distortion factor:<0.1 %
Slew rate:20 V/µsec
S/N ratio:>95 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, 2 x XLR feed-through output
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal, -6 dB, -12 dB, -18 dB, -25 dB (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
Shipping weight:4.75 kg
ΕΚΠΤΩΣΗ 20 % ΕΞΟΙΚΟΝΟΜΗΣΗ
Πρόγραμμα από 07.06.2017 έως 31.12.2017
599,00 €
479,00 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  EDP-700 Class D Amplifier

Αριθμός υλικού 10451612
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 360 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:700 W
Power output sine:
stereo 4 ohms2 x 360 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 720 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>200
Distortion factor:0.05 %
Slew rate:20 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker (L/R), 1 x Speaker (bridge)
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal level (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
Shipping weight:5.02 kg
269,00 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  XDA-1002 Class D Amplifier

Αριθμός υλικού 10451635
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 510 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LEDs for activated protective circuit, limiter, signal, and power
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, softstart
  • Ground lift switch against humming
  • Fan cooling
  • Electronically balanced inputs via XLR mounting jacks with feed-through output
  • Speaker outputs via lockable speaker jacks
  • Rack installation with 1 unit
Power supply:230 V AC, 50 Hz
Power consumption:210 W (1/8 power)
Power output (RMS):
stereo 4 ohms2 x 510 W
stereo 8 ohms2 x 300 W
8 ohms bridged1 x 1000 W
Frequency range:30-20000 Hz
Distortion factor:<0.02 %
Voltage gain:36 dB at 8 ohms
S/N ratio:>100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1.25 V RMS
Input connectors:2 x XLR
Output connectors:2 x Speaker, 2 x XLR feed-through output
Circuitry:class D
Control elements: power switch, level control per channel, mode switch (stereo/bridged), ground lift switch
LED indicators:Protect, limit, signal, power
Protection circuits:Short-circuit, overheat, DC voltage, power on/off
transients, softstart
Construction:steel chassis
Dimensions (DxWxH):240 x 483 x 44 mm (19", 1 U)
Weight:4 kg
Shipping weight:4.65 kg
229,00 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  XDA-2402 Class D Amplifier

Αριθμός υλικού 10451636
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 1200 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 level controls
  • LEDs for activated protective circuit, limiter, signal, and power
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, softstart
  • Ground lift switch against humming
  • Fan cooling
  • Electronically balanced inputs via XLR mounting jacks with feed-through output
  • Speaker outputs via lockable speaker jacks
  • Rack installation with 1 unit
Power supply:230 V AC, 50 Hz
Power consumption:465(1/8 power)
Power output (RMS):
stereo 4 ohms2 x 1200
stereo 8 ohms2 x 880
Frequency range:30-20000 Hz
Distortion factor:<0.02 %
Voltage gain:36 dB at 8 ohms
S/N ratio:>100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1.25 V RMS
Input connectors:2 x XLR
Output connectors:2 x Speaker, 2 x XLR feed-through output
Circuitry:class D
Control elements:power switch, level control per channel, ground lift switch
LED indicators:Protect, limit, signal, power
Protection circuits:Short-circuit, overheat, DC voltage, power on/off
transients, softstart
Construction:steel chassis
Dimensions (DxWxH):355 x 483 x 44 mm (19", 1 U)
Weight:6.4 kg
Shipping weight:7.75 kg
349,00 
Επαρκές απόθεμα για 12 εβδομάδες
1
Τελευταία προϊόντα που έχετε δεί
Your request was successful sent.
Loader
Please wait while the page is loading...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use