Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Ταξινόμηση
Προϊόντα ανά σελίδα:
1 2 3 4

OMNITRONIC  DJP-700 Class D Amplifier

Αριθμός υλικού 10451601
Χαρακτηριστικά
Τεχνικές πληροφορίες

Compact stereo mixing amplifier, 2 x 300 W

  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
169,00 
Δεν είναι διαθέσιμο στην αποθήκη

OMNITRONIC  DJP-700P Class D Amplifier

Αριθμός υλικού 10451602
Χαρακτηριστικά
Τεχνικές πληροφορίες

Compact stereo mixing amplifier with audio player and Bluetooth, 2 x 300 watts

  • Compact stereo mixing amplifier 2 x 300 watts
  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Built-in audio player with Bluetooth receiver
  • Stream music wirelessly from your mobile devices (e.g. smartphone, tablet) via Bluetooth
  • USB 2.0 input and SD card slot
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
Audio player:
Playback format:MP3, WMA, WAV
Available storage media:USB devices and SD(HC) cards up to 32 GB
File system:FAT16/32
Bluetooth:
Carrier frequency:2.4 GHz
Range:approx. 10 m
189,00 
Δεν είναι διαθέσιμο στην αποθήκη

OMNITRONIC  EDP-3600 Class D Amplifier

Αριθμός υλικού 10451615
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS 2 x 1700 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:1050 W (1/8 power)
Power output (RMS):
stereo 4 ohms2 x 1700 W
stereo 8 ohms2 x 1000 W
8 ohms bridged1 x 3600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>250
Distortion factor:<0.1 %
Slew rate:20 V/µsec
S/N ratio:>95 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, 2 x XLR feed-through output
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal, -6 dB, -12 dB, -18 dB, -25 dB (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
ΕΚΠΤΩΣΗ 20 % ΕΞΟΙΚΟΝΟΜΗΣΗ
Πρόγραμμα από 07.06.2017 έως 30.06.2018
599,00 €
479,00 
Επαρκές απόθεμα για 12 εβδομάδες
Ενδιαφέρουσα εναλλακτική, πρέπει να το δείτε.
OMNITRONIC XPA-2700 Amplifier

PSSO  HP-2400 Amplifier

Αριθμός υλικού 10451651
Χαρακτηριστικά
Τεχνικές πληροφορίες

High-power amplifier 2 x 1200 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:1300 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1200 W
Stereo 8 ohms2 x 690 W
8 ohms bridged1 x 2400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:22 kg
ΕΚΠΤΩΣΗ 34 % ΕΞΟΙΚΟΝΟΜΗΣΗ
Πρόγραμμα από 27.06.2017 έως 30.06.2018
699,00 €
461,34 
Επαρκές απόθεμα για 12 εβδομάδες

PSSO  HSP-1000 MK2 SMPS Amplifier

Αριθμός υλικού 10451682
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS

  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:1000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 500 W
Stereo 8 ohms2 x 310 W
8 ohms bridged1 x 1000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:8 kg
439,00 
Δεν είναι διαθέσιμο στην αποθήκη

PSSO  HSP-2800 MK2 SMPS Amplifier

Αριθμός υλικού 10451690
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS, 2 x 1400 W

  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1400 W
Stereo 8 ohms2 x 850 W
8 ohms bridged1 x 3000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:13 kg
829,00 
Επαρκές απόθεμα για 12 εβδομάδες

PSSO  HSP-4000 MK2 SMPS Amplifier

Αριθμός υλικού 10451694
Χαρακτηριστικά
Τεχνικές πληροφορίες

Stereo PA amplifier with integrated SMPS, 2 x 2000 W

  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:2000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 2000 W
Stereo 8 ohms2 x 1200 W
8 ohms bridged1 x 4100 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:32 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:14 kg
722,93 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  MCP-4150 4-Channel Amplifier

Αριθμός υλικού 10452410
Χαρακτηριστικά
Τεχνικές πληροφορίες

4-channel PA amplifier with integrated limiter 4 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 4 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:900 W
Power output sine:
4 ohms:4 x 150 W
8 ohms:4 x 100 W
8 ohms bridged:2 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:102 dB
Channel separation (at 1 kHz):61 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:4 x XLR female, 4 x terminal block
Output connectors:4 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:16 kg
399,00 
Επαρκές απόθεμα για 12 εβδομάδες

OMNITRONIC  MCP-6150 6-Channel Amplifier

Αριθμός υλικού 10452420
Χαρακτηριστικά
Τεχνικές πληροφορίες

6-channel PA amplifier with integrated limiter 6 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 6 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1400 W
Power output sine:
4 ohms:6 x 150 W
8 ohms:6 x 100 W
8 ohms bridged:3 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:97 dB
Channel separation (at 1 kHz):51 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:6 x XLR female, 6 x terminal block
Output connectors:6 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:17.5 kg
449,00 
Επαρκές απόθεμα για 6 εβδομάδες

OMNITRONIC  MCP-8150 8-Channel Amplifier

Αριθμός υλικού 10452430
Χαρακτηριστικά
Τεχνικές πληροφορίες

8-channel PA amplifier with integrated limiter 8 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 8 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1850 W
Power output sine:
4 ohms:8 x 150 W
8 ohms:8 x 100 W
8 ohms bridged:4 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:90 dB
Channel separation (at 1 kHz):51 dB
Min. input sensitivity:0.77 V
Slew rate:>30 V/µsec
Input impedance:12 kohms (unbalanced), 22 kohms(balanced)
Input connectors:8 x XLR female, 8 x terminal block
Output connectors:8 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:19 kg
515,00 
Επαρκές απόθεμα για 12 εβδομάδες
1 2 3 4
Τελευταία προϊόντα που έχετε δεί
Your request was successful sent.
Loader
Please wait while the page is loading...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use