Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Tri:
Articles par page:
1 2 3 4

PSSO  Amp Set for Line Array L MK2

Art. n° 11041067
Caractéristiques
Données techniques

10451694 PSSO HSP-4000 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10356364 PSSO DXO-48 PRO Digital Controller

    Digital speaker management system with real-time network communication
  • Digital network speaker management system with 64-bit processing
  • Premium components ensure excellent sound-features
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 1digital AES/EBU interface (XLR)
  • 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • 10-band parametric EQ per input and output
  • Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • The intelligent software for PC and Mac allows convenient control with a computer
  • Full configuration and real-time network communication via the built-in Ethernet interface
  • Up to 80 user presets storable in the device via software
  • Control of all functions also possible via the controls at the front panel
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit VU meter
  • Mute switch with LED indicator per output
  • Up to 2000 ms signal delay adjustable for the inputs and outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase (180°)
  • Lock function for protecting the program settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
  • Control your speaker systems more flexible than ever with the DXO Control app
  • DXO Control for iPad supports all functions of the PC software and is available for free from the app store
  • Made in Germany

10451694 PSSO HSP-4000 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:2000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 2000 W
Stereo 8 ohms2 x 1200 W
8 ohms bridged1 x 4100 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:32 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:14 kg

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 500 W
Stereo 8 ohms2 x 310 W
8 ohms bridged1 x 1000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:8 kg

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1400 W
Stereo 8 ohms2 x 850 W
8 ohms bridged1 x 3000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:13 kg

10356364 PSSO DXO-48 PRO Digital Controller

Power supply:100-240 V AC, 50/60 Hz
Power consumption:10 W
Inputs:4 x XLR, balanced
Maximum input level:+22 dBu
Input impedance:10 kohms
Dynamic range:118 dBA
Digital input:1 x AES/EBU (XLR)
Input impedance:110 ohms
Outputs:8 x XLR, balanced
Output impedance:50 ohms (electronically balanced)
Output gain range:-50 to +12 dB
Maximum output level:+12 dBu
Dynamic range:118 dBA
Frequency range:10-40000 Hz
Sampling frequency:65 kHz
Distortion:0.005 %
Filter types:Bessel, Butterworth or Linkwitz-Riley
Slopes:6, 12, 18 or 24 dB/octave
Crossover frequency:20-20000 Hz
Delay:0 to 2000 ms (inputs/outputs)
Communication:LAN (TCP/IP), USB type B
Dimensions (W x D x H):482 x 44 x 223 mm
Weight:2.7 kg
4.769,00 
Seulement quelques unités encore disponibles

PSSO  Amp Set for Line Array M MK2

Art. n° 11041066
Caractéristiques
Données techniques

10451694 PSSO HSP-4000 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10356362 PSSO DXO-26 PRO Digital Controller

    Digital speaker management system with real-time network communication
  • Digital network speaker management system with 64-bit processing
  • Premium components ensure excellent sound-features
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 2 analog inputs and 1digital AES/EBU interface (XLR)
  • 6 analog outputs (XLR)
  • 10-band parametric EQ per input and output
  • Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • The intelligent software for PC and Mac allows convenient control with a computer
  • Full configuration and real-time network communication via the built-in Ethernet interface
  • Up to 80 user presets storable in the device via software
  • Control of all functions also possible via the controls at the front panel
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit VU meter
  • Mute switch with LED indicator per output
  • Up to 2000 ms signal delay adjustable for the inputs and outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase (180°)
  • Lock function for protecting the program settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
  • Control your speaker systems more flexible than ever with the DXO Control app
  • DXO Control for iPad supports all functions of the PC software and is available for free from the app store
  • Made in Germany

10451694 PSSO HSP-4000 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:2000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 2000 W
Stereo 8 ohms2 x 1200 W
8 ohms bridged1 x 4100 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:32 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:14 kg

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 500 W
Stereo 8 ohms2 x 310 W
8 ohms bridged1 x 1000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:8 kg

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1400 W
Stereo 8 ohms2 x 850 W
8 ohms bridged1 x 3000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:13 kg

10356362 PSSO DXO-26 PRO Digital Controller

Power supply:100-240 V AC, 50/60 Hz
Power consumption:10 W
Analog inputs:2 x XLR, balanced
Maximum input level:+22 dBu
Input impedance:10 kohms
Dynamic range:118 dBA
Digital input:1 x AES/EBU (XLR)
Input impedance:110 ohms
Outputs:6 x XLR, balanced
Output impedance:50 ohms (electronically balanced)
Output gain range:-50 to +12 dB
Maximum output level:+12 dBu
Dynamic range:118 dBA
Frequency range:10-40000 Hz
Sampling frequency:65 kHz
Distortion:0.005 %
Filter types:Bessel, Butterworth or Linkwitz-Riley
Slopes:6, 12, 18 or 24 dB/octave
Crossover frequency:20-20000 Hz
Delay:0 to 2000 ms (inputs/outputs)
Communication:LAN (TCP/IP), USB type B
Dimensions (W x D x H):482 x 44 x 223 mm
Weight:2.5 kg
3.749,00 
Seulement quelques unités encore disponibles

PSSO  Amp Set for Line Array S MK2

Art. n° 11041065
Caractéristiques
Données techniques

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

    Stereo PA amplifier with integrated SMPS
  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units

10356362 PSSO DXO-26 PRO Digital Controller

    Digital speaker management system with real-time network communication
  • Digital network speaker management system with 64-bit processing
  • Premium components ensure excellent sound-features
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 2 analog inputs and 1digital AES/EBU interface (XLR)
  • 6 analog outputs (XLR)
  • 10-band parametric EQ per input and output
  • Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • The intelligent software for PC and Mac allows convenient control with a computer
  • Full configuration and real-time network communication via the built-in Ethernet interface
  • Up to 80 user presets storable in the device via software
  • Control of all functions also possible via the controls at the front panel
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit VU meter
  • Mute switch with LED indicator per output
  • Up to 2000 ms signal delay adjustable for the inputs and outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase (180°)
  • Lock function for protecting the program settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
  • Control your speaker systems more flexible than ever with the DXO Control app
  • DXO Control for iPad supports all functions of the PC software and is available for free from the app store
  • Made in Germany

10451682 PSSO HSP-1000 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 500 W
Stereo 8 ohms2 x 310 W
8 ohms bridged1 x 1000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:8 kg

10451690 PSSO HSP-2800 MK2 SMPS Amplifier

Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1400 W
Stereo 8 ohms2 x 850 W
8 ohms bridged1 x 3000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:13 kg

10356362 PSSO DXO-26 PRO Digital Controller

Power supply:100-240 V AC, 50/60 Hz
Power consumption:10 W
Analog inputs:2 x XLR, balanced
Maximum input level:+22 dBu
Input impedance:10 kohms
Dynamic range:118 dBA
Digital input:1 x AES/EBU (XLR)
Input impedance:110 ohms
Outputs:6 x XLR, balanced
Output impedance:50 ohms (electronically balanced)
Output gain range:-50 to +12 dB
Maximum output level:+12 dBu
Dynamic range:118 dBA
Frequency range:10-40000 Hz
Sampling frequency:65 kHz
Distortion:0.005 %
Filter types:Bessel, Butterworth or Linkwitz-Riley
Slopes:6, 12, 18 or 24 dB/octave
Crossover frequency:20-20000 Hz
Delay:0 to 2000 ms (inputs/outputs)
Communication:LAN (TCP/IP), USB type B
Dimensions (W x D x H):482 x 44 x 223 mm
Weight:2.5 kg
2.499,00 
Seulement quelques unités encore disponibles

OMNITRONIC  Set 2x M-2 Speaker system stand + Carrying bag

Art. n° 20000388
Caractéristiques
Données techniques

60004182 OMNITRONIC M-2 Speaker-System Stand

    High-quality speaker stand
  • Stable speaker stand for mobile use
  • The telescopic tube is additionally fixed with a safety pin

6000490N OMNITRONIC Carrying Bag for two Speaker Stands

    Accessory
  • For two speaker stands
  • Two more bags inside the bag

60004182 OMNITRONIC M-2 Speaker-System Stand

Maximum load:30 kg
Minimum height:1.00 m
Maximum height:1.70 m
Material:Steel
Weight:3.2 kg

6000490N OMNITRONIC Carrying Bag for two Speaker Stands

Outside bag (W x D x H):120 x 25 x 15 cm
Inside bags (W x D x H):120 x 15 x 15 cm
58,50 
Stock suffisant pour environ 4 semaine(s)

OMNITRONIC  Set 2x Speaker system stand alu black + Carrying bag

Art. n° 20000387
Caractéristiques
Données techniques

60004120 OMNITRONIC Speaker System Stand alu bk

    High-quality speaker stand
  • Stable speaker stand for mobile use
  • The telescopic tube is additionally fixed with a safety pin

6000490N OMNITRONIC Carrying Bag for two Speaker Stands

    Accessory
  • For two speaker stands
  • Two more bags inside the bag

60004120 OMNITRONIC Speaker System Stand alu bk

Maximum load:30 kg
Maximum load (DIN15560):18 kg
Minimum height:1.40 m
Maximum height:2.20 m
Weight:3 kg

6000490N OMNITRONIC Carrying Bag for two Speaker Stands

Outside bag (W x D x H):120 x 25 x 15 cm
Inside bags (W x D x H):120 x 15 x 15 cm
89,90 
Stock suffisant pour environ 4 semaine(s)

OMNITRONIC  Set ACS-510 + PM-311P + SHP-2000 MK2 + Basecap

Art. n° 20000170
Caractéristiques
Données techniques

11038861 OMNITRONIC ACS-510 Lautsprecheranlage

11038862 OMNITRONIC ACS-510 stands and stand adaptors

10006879 OMNITRONIC PM-311P DJ Mixer with Player

    3-channel DJ mixer with built-in MP3 player
  • 3 input channels, switchable 2 x phono/line and 1 x USB/line
  • MP3 player for external USB storage media up to 32 GB, e.g. USB flash drives or portable players
  • All input channels with gain control, 3-band equalizer and cue button
  • DJ microphone input with talkover selector, level control and 3-band equalizer
  • Pre-fader listening (CUE) to the input channels and the master output via adjustable headphones output, with cue mix control
  • Crossfader for crossfading between the phono/line channels
  • 5-digit stereo LED level meter, switchable between master and PFL signal
  • Additional recording output
  • Operation via supplied power unit

1400039F OMNITRONIC SHP-2000 MK2 DJ Headphones

    Comfortable DJ stereo headphones
  • Closed dynamic stereo headphones for DJs
  • 50 mm driver
  • Distortion-free playback also at a high volume
  • Optimal wearer-comfort due to single cable (L)
  • Well-padded, adjustable headband
  • Oversized earpieces for screening undesired noise
  • Space-saving design with collapsible, rotating (180°) earcups
  • Detachable connection cable with gold-plated 3.5 mm stereo jack
  • Rugged workmanship for discotheque and stage use
  • Incl. 6.3 mm jack adapter and bag

30225166 OMNITRONIC Adaptercable RCA/XLR 5m rd

80162201 OMNITRONIC Cap heather gray/black

  • Made in Germany

10006879 OMNITRONIC PM-311P DJ Mixer with Player

Power supply:230 V AC, 50 Hz ~
via supplied power unit
Power consumption:4 W
USB port:USB type A
Available storage media:USB devices up to 32 GB (FAT32)
Playback format:MP3, WAV
Inputs:
Line/phono:2 x stereo RCA
Line:stereo RCA
DJ microphone:6.3 mm jack, unbal.
Outputs:
Master:stereo RCA
Record:stereo RCA
Headphones output:6.3 mm stereo jack (min. 32 ohms)
Frequency range:20-20000 Hz
S/N ratio:>75 dB
Distortion:<0.07 %
Dimensions (L x W x H):260 x 172 x 78 mm
Weight:1.5kg

1400039F OMNITRONIC SHP-2000 MK2 DJ Headphones

Transducer type:Dynamic
Frequency range:20-20000 Hz
Impedance:60 ohms
Sensitivity:95 dB
Rated power:200 mW
Cable length:120 cm
Connection:3.5 mm/6.3 mm stereo jack plug
Weight:300 g

30225166 OMNITRONIC Adaptercable RCA/XLR 5m rd

Cable length:5 m
Color:Black
Plug A:1 x RCA (M)
Plug B:1 x 3-pole XLR (M)
869,00 
cet article n'est pas disponible actuellement

OMNITRONIC  Set AS-500 + Wheel board

Art. n° 20000353
Caractéristiques
Données techniques

11038815 OMNITRONIC AS-500 Top

11038816 OMNITRONIC AS-500 SUB, Active

11038809 OMNITRONIC Wheel Board for AS-500 Active Aystem

825,00 
Seulement quelques unités encore disponibles

OMNITRONIC  Set ASS-1503 + Castor set

Art. n° 20000354
Caractéristiques
Données techniques

11038853 OMNITRONIC ASS-1503 Subwoofer

11038854 OMNITRONIC ASS-1503 Satellite

11038857 OMNITRONIC Castor Set for ASS-1503

    Set with 4 castors
  • Suitable for ASS-1503 subwoofer
689,00 
Seulement quelques unités encore disponibles

OMNITRONIC  Set DD-2520 USB Turntable bk + Case black -S-

Art. n° 20000304
Caractéristiques
Données techniques

10603060 OMNITRONIC DD-2520 USB Turntable bk

    Direct-drive DJ turntable with switchable phono/line output
  • Built-in USB port and additional phono preamplifier, for a high-quality and convenient digitization of analog vinyl records
  • Driver installation not required, unit is identified automatically
  • Sampling rates of 44.1 kHz and 48 kHz in stereo, resolution: 16 bits
  • Incl. software for recording and editing
  • Precision direct drive
  • Delivery includes pick-up system
  • 2 speeds, pitch control ±10 %
  • Large start/stop button
  • Strobe lamp for exact speed adjustment
  • Target lamp
  • Delivery includes removable dustcover
  • Adjustable anti-skating
  • Shock-absorbing feet
  • Switchable output phono/line
  • USB 1.1 support
  • Suitable for Windows XP, Vista, 7 and Mac OS X

30123220 ROADINGER Turntable Case black -S-

    Professional flight case for turntables with S tone arm
  • Suitable for all turntables without dust cover (up to 450 mm width)
  • Interior upholstered with foam
  • High-quality workmanship with 4 mm plywood multilayered glued, black laminated
  • Aluminum profile frames (25 mm) with rounded edges
  • Removable cover
  • Three-leg, medium-sized steel ball corners
  • 2 high-quality spring locks
  • Rubber feet
  • Padded carrying handle

10603060 OMNITRONIC DD-2520 USB Turntable bk

Power supply:115/230 V, 50/60 Hz
Power consumption:12 W
Type:Manual turntable
Drive method:Direct drive
Motor:Brushless 24 V DC motor
Speed:33 1/3 RPM and 45 RPM
Change time between speeds:33 ->45 RPM in <1 sec
45 ->33 RPM in <1 sec
Pitch adjustment:±10 % via fader
Initial torque:>1.0 kg/cm
Start time:<1 sec
Stop time:<1 sec
Wow and flutter:<0.15 %
Rumble:55 dB DIN B
Platter:Outer diameter 330 mm
Weight 728 g
Tonearm:S-shape with Cardan's suspension
Tonearm length:230.5 mm
Overhang:16 mm
Adjustable stylus pressure0-4 g
Anti-skating range:0-7 g
Phono output level:1.5-3.6 mV/ 1 kHz 5 cm/sec
Line output level:90-216 mV/ 1 kHz 5 cm/sec
Frequency range: 20-20000 Hz
Channel separation:>15 dB
Output connectors:RCA, USB type B
Dimensions:450 x 350 x 155 mm
Weight:11 kg

30123220 ROADINGER Turntable Case black -S-

Maximum load:15 kg
Strength:4 mm
Outside dimensions (W x D x H):515 x 435 x 210 mm
Inside dimensions:
Mounting width:450 mm
Mounting height:150 mm
Mounting depth:355 mm
Outer dimensions/corners:55 mm
Weight:7.8 kg
299,00 
Stock suffisant pour environ 8 semaine(s)

OMNITRONIC  Set DD-2550 USB Turntable sil + Case black -S-

Art. n° 20000305
Caractéristiques
Données techniques

10603061 OMNITRONIC DD-2550 USB Turntable sil

    Direct drive DJ turntable with switchable phono/line output
  • Built-in USB port and additional phono preamplifier, for a high-quality and convenient digitization of analog vinyl records
  • Driver installation not required, unit is identified automatically
  • Sampling rates of 44.1 kHz and 48 kHz in stereo, resolution: 16 bits
  • Incl. software for recording and editing
  • Precision direct drive
  • Delivery includes pick-up system
  • 2 speeds, pitch control ±10 %
  • Large start/stop button
  • Strobe lamp for exact speed adjustment
  • Target lamp
  • Delivery includes removable dustcover
  • Adjustable anti-skating
  • Shock-absorbing feet
  • Switchable output phono/line
  • USB 1.1 support
  • Suitable for Windows XP, Vista, 7 and Mac OS X

30123220 ROADINGER Turntable Case black -S-

    Professional flight case for turntables with S tone arm
  • Suitable for all turntables without dust cover (up to 450 mm width)
  • Interior upholstered with foam
  • High-quality workmanship with 4 mm plywood multilayered glued, black laminated
  • Aluminum profile frames (25 mm) with rounded edges
  • Removable cover
  • Three-leg, medium-sized steel ball corners
  • 2 high-quality spring locks
  • Rubber feet
  • Padded carrying handle

10603061 OMNITRONIC DD-2550 USB Turntable sil

Power supply:115/230 V, 50/60 Hz
Power consumption:12 W
Type:Manual turntable
Drive method:Direct drive
Motor:Brushless 24 V DC motor
Speed:33 1/3 RPM and 45 RPM
Change time between speeds:
33 ->45 RPM in <1 sec
45 ->33 RPM in <1 sec
Pitch adjustment:±10 % via fader
Initial torque:>1.0 kg/cm
Start time:<1 sec
Stop time:<1 sec
Wow and flutter:<0.15 %
Rumble:55 dB DIN B
Platter:Outer diameter 330 mm
Weight 728 g
Tonearm:S-shape with Cardan's suspension
Tonearm length:230.5 mm
Overhang:16 mm
Adjustable stylus pressure0-4 g
Anti-skating range:0-7 g
Phono output level:1.5-3.6 mV/ 1 kHz 5 cm/sec
Line output level:90-216 mV/ 1 kHz 5 cm/sec
Frequency range: 20-20000 Hz
Channel separation:>15 dB
Output connectors:RCA, USB type B
Dimensions:450 x 350 x 155 mm
Weight:11 kg

30123220 ROADINGER Turntable Case black -S-

Maximum load:15 kg
Strength:4 mm
Outside dimensions (W x D x H):515 x 435 x 210 mm
Inside dimensions:
Mounting width:450 mm
Mounting height:150 mm
Mounting depth:355 mm
Outer dimensions/corners:55 mm
Weight:7.8 kg
299,00 
Stock suffisant pour environ 8 semaine(s)
1 2 3 4
Derniers articles consultés
Votre commande a bien été envoyée.
Loader
Page en cours de chargement...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use