Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Sorting
Products per page:
1 2 3
This product has the successor:
OMNITRONIC XPA-350 Amplifier

OMNITRONIC  E-200 MK2 Amplifier

Item no. 10451051
Features
Technical specifications

Stereo PA amplifier with integrated limiter

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:115 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 100 W
Stereo 8 ohms2 x 60 W
8 ohms bridged1 x 200 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:40 V/µsec
S/N ratio:>90 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:8 kg
Shipping weight:7.55 kg
139,00 
Stock for approx. 12 wk(s)
This product has the successor:
OMNITRONIC XPA-2700 Amplifier

OMNITRONIC  E-2000 MK2 Amplifier

Item no. 10451069
Features
Technical specifications

Stereo PA amplifier with integrated limiter

  • Class AB circuitry
  • 3 operating modes can be selected (stereo, parallel bridged)
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Selectable input sensitivity
  • Fan cooling
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Signal inputs via XLR or 6.3 mm mounting jacks
  • Additional Speaker plug for 8-ohm bridge operation
  • 8-ohm bridge operation via screw terminals or additional Speaker plug
  • Rack installation
Power supply:230 V AC, 50 Hz
Power consumption:1700 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 1000 W
Stereo 8 ohms2 x 650 W
8 ohms bridged1 x 2000 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>250
Distortion factor:0.1 %
Slew rate:30 V/µsec
S/N ratio:>90 dB
Input sensitivity:0.77 V/1.0 V/1.4 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 6.3 mm jack
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals
Control elements: power switch, level control per channel, mode switch, limiter switch, groundlift switch, input sensitivity switch
Protection circuits: short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):425 x 482 x 106 mm (19", 2 U)
Weight:15.5 kg
Shipping weight:17.00 kg
SALE 19 % SAVINGS
Special offer from 30.09.2016 to 31.12.2017
435,00 €
349,00 
Stock for approx. 12 wk(s)
This product has the successor:
OMNITRONIC XPA-700 Amplifier

OMNITRONIC  E-600 MK2 Amplifier

Item no. 10451061
Features
Technical specifications

Stereo PA amplifier with integrated limiter 2 x 300 W/4 ohms

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:327 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 300 W
Stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:45 V/µsec
S/N ratio:>100 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:10 kg
Shipping weight:9.30 kg
199,00 
Stock for approx. 5 wk(s)
This product has the successor:
OMNITRONIC XPA-1000 Amplifier

OMNITRONIC  E-900 MK2 Amplifier

Item no. 10451066
Features
Technical specifications

Stereo PA amplifier with integrated limiter 2 x 450 W/4 ohms

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:511 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 450 W
Stereo 8 ohms2 x 300 W
8 ohms bridged1 x 900 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:45 V/µsec
S/N ratio:>100 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:12 kg
Shipping weight:11.40 kg
249,00 
Stock for approx. 2 wk(s)
Attractive alternative, definitely worth a look!
OMNITRONIC XPA-1800 Amplifier

PSSO  HP-1400 Amplifier

Item no. 10451650
Features
Technical specifications

High-power amplifier 2 x 700 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:740 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 700 W
Stereo 8 ohms2 x 400 W
8 ohms bridged1 x 1400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:17 kg
Shipping weight:24.60 kg
485,00 
Stock for approx. 12 wk(s)
Attractive alternative, definitely worth a look!
OMNITRONIC XPA-2700 Amplifier

PSSO  HP-2400 Amplifier

Item no. 10451651
Features
Technical specifications

High-power amplifier 2 x 1200 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:1300 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1200 W
Stereo 8 ohms2 x 690 W
8 ohms bridged1 x 2400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:22 kg
Shipping weight:29.10 kg
SALE 34 % SAVINGS
Special offer from 20.01.2017 to 31.12.2017
699,00 €
461,34 
Stock for approx. 12 wk(s)

OMNITRONIC  MCP-4150 4-Channel Amplifier

Item no. 10452410
Features
Technical specifications

4-channel PA amplifier with integrated limiter 4 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 4 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:900 W
Power output sine:
4 ohms:4 x 150 W
8 ohms:4 x 100 W
8 ohms bridged:2 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:102 dB
Channel separation (at 1 kHz):61 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:4 x XLR female, 4 x terminal block
Output connectors:4 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:16 kg
Shipping weight:15.20 kg
399,00 
Stock for approx. 12 wk(s)

OMNITRONIC  MCP-6150 6-Channel Amplifier

Item no. 10452420
Features
Technical specifications

6-channel PA amplifier with integrated limiter 6 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 6 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1400 W
Power output sine:
4 ohms:6 x 150 W
8 ohms:6 x 100 W
8 ohms bridged:3 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:97 dB
Channel separation (at 1 kHz):51 dB
Slew rate:>30 V/µsec
Min. input sensitivity:0.77 V
Input impedance:12 kohms (unbalanced), 22 kohms (balanced)
Input connectors:6 x XLR female, 6 x terminal block
Output connectors:6 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:17.5 kg
Shipping weight:16.40 kg
449,00 
Stock for approx. 12 wk(s)

OMNITRONIC  MCP-8150 8-Channel Amplifier

Item no. 10452430
Features
Technical specifications

8-channel PA amplifier with integrated limiter 8 x 150 W/4 ohms

  • PA amplifier with integrated limiter for multi-zone applications
  • 8 x 150 W/4 ohms
  • 8-ohm bridge operation possible
  • Signal inputs via balanced XLR mounting jacks or terminal blocks
  • Speaker connection via terminal blocks
  • High pass filter, low pass filter can be switched on additionally for each channel
  • Tamper-proof level adjustment on the rear panel
  • 7-fold output meter with clip LED per channel
  • Speaker switch-on delay
  • Groundlift switch against humming
  • Fan cooling
  • Robust steel chassis with aluminum front
  • Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
  • Rack installation with 3 units
Power supply:115/230 V AC, 50/60 Hz
Power consumption:1850 W
Power output sine:
4 ohms:8 x 150 W
8 ohms:8 x 100 W
8 ohms bridged:4 x 300 W
Frequency range:22-25000 Hz
Damping factor:>200
Distortion factor:0.01 %
SN ratio:90 dB
Channel separation (at 1 kHz):51 dB
Min. input sensitivity:0.77 V
Slew rate:>30 V/µsec
Input impedance:12 kohms (unbalanced), 22 kohms(balanced)
Input connectors:8 x XLR female, 8 x terminal block
Output connectors:8 x terminal block
Control elements:Power switch, level control per channel, crossover on/off per channel, high/low pass per channel, mode switch (stereo/bridged)
Indicators:Level with clip per channel, bridged
Protection circuits:Softstart, short-circuit, overheat, overload and DC voltage
Construction:Steel chassis with aluminum front panel
Dimensions:310 x 482 x 132 mm
Minimum mounting depth:320 mm
Weight:19 kg
Shipping weight:17.30 kg
515,00 
Stock for approx. 12 wk(s)

OMNITRONIC  MCS-1250 MK2 6-Zone PA Amplifier

Item no. 10452480
Features
Technical specifications

6-zone audio amplifier with matrix assignment, 2 x 50 W pro zone

  • 6-zone stereo amplifier for multi-zone PA applications
  • Updated version with touch pad wall controller
  • 12 x 50 W/4 ohms per zone
  • Bridge mode with 100 W/8 ohms individually selectable per zone
  • Efficient Class D technology
  • 6 stereo inputs expandable to 18 stereo zones with further units
  • Matrix input assignment: input sources are freely assignable to each channel
  • 6 pre-amp outputs to connect external power amplifiers
  • Convenient control via touch pad wall controller or IR remote control
  • Incl. 6 wall controllers with touch-sensitive surface (touch pad), LCD with blue backlight and IR receiver
  • Wall controller allows selecting the audio source and volume, treble, bass adjustment for each zone individually
  • Incl. wall hub for up to 6 wall controllers
  • Incl. IR remote control
  • Signal inputs: 4 x stereo RCA, 2 x 3.5 mm jack and 1 x Toslink for digital audio signals
  • Speaker connection via terminal blocks
  • 6 zone status indicators on the front panel
  • Automatic gain control selectable for level matching of signal sources
  • Terminals for IR emitters (accessory) allow extending the IR signals from the remote controls of the signal sources
  • RS232 port enables two-way communication with a home automation system
  • Trigger input for muting
  • 6 trigger outputs for switching external amplifiers
  • Rack installation with 2 U
Power supply:230 V AC, 50 Hz
Power consumption:1250 W
Output power sine:
Stereo 4 ohms:2 x 50 W per zone
Stereo 8 ohms:2 x 25 W per zone
8 ohms bridged:6 x 100 W
Frequency range:20-20000 Hz
Distortion:0.1 % (1 kHz)
S/N ratio: 85 dB
Input sensitivity:250 mV
Input impedance:>47 kohms
Inputs:
1-4:RCA L/R
5:3.5 mm stereo jack
6:3.5 mm stereo jack and Toslink
Speaker connectors:Terminal block
Output hub/keypad:RJ-45
Home automation interface:RS-232
Muting:12 V DC, via 3.5 mm mono jack
Trigger output:12 V DC, via 3.5 mm mono jack
IR emitter connectors:12 V DC, via 3.5 mm mono jack
LED indicators (per channel):standby/on, peak
Protection circuits:short-circuit, overheat, overload
Dimensions:482 x 420 x 102 mm (19", 2 U)
Weight:13 kg
Shipping weight:15.60 kg
1.199,00 
Stock for approx. 12 wk(s)
1 2 3
Last seen products
Your request was successful sent.
Loader
Please wait while the page is loading...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use