Steinigke Showtechnic GmbH - your wholesale company for event technology. We only sell to commercial customers. All prices without tax.
Sorting
Products per page:
1 2 3 4

OMNITRONIC  DJP-700 Class D Amplifier

продукт номер 10451601
информация
технически данни

Compact stereo mixing amplifier 2 x 300 W

  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
169,00 
в наличност до 12 седмици

OMNITRONIC  DJP-700P Class D Amplifier

продукт номер 10451602
информация
технически данни

Compact stereo mixing amplifier with audio player and Bluetooth 2 x 300 watts

  • Compact stereo mixing amplifier 2 x 300 watts
  • For quick-access music playback control in restaurants, fitness studios and retail locations
  • Built-in audio player with Bluetooth receiver
  • Stream music wirelessly from your mobile devices (e.g. smartphone, tablet) via Bluetooth
  • USB 2.0 input and SD card slot
  • Efficient class D circuitry
  • Silent operation due to fanless cooling concept
  • Extremely low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • Speaker switch-on delay and auto limiters
  • 4 stereo line inputs
  • 1 mono microphone input with gain control on the front panel
  • Additional 3.5 mm connection on the front panel
  • Audio source selector
  • Controls for volume, bass and treble
  • Stereo master output
  • Extensive protective circuits
  • Robust steel chassis with aluminum front panel
Power supply:230 V AC, 50 Hz
Power consumption:130 W (1/8 power)
Power output sine:
stereo 4 ohms2 x 300 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>300
Distortion factor:0.05 %
Slew rate:14 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input sensitivity:1 V
Input connectors:
Line 1-4:RCA L/R
Mic:combination XLR/6.3 mm jack, unbal.
Aux:3.5 stereo jack
Output connectors:
Master:RCA L/R
Speaker:screw connectors
Circuitry:class D
Control elements:power switch, source selector, level/tone controls, mode switch (stereo/bridged)
LED indicators:power
Protection circuits:softstart, short-circuit, overheat, clipping, overload, VHF signals, DC voltage
Construction:steel chassis, aluminum front
Dimensions (DxWxH):256 x 233 x 44 mm
Weight:2.2 kg
Audio player:
Playback format:MP3, WMA, WAV
Available storage media:USB devices and SD(HC) cards up to 32 GB
File system:FAT16/32
Bluetooth:
Carrier frequency:2.4 GHz
Range:approx. 10 m
189,00 
този артикул не е на разположение
This product has the successor:
OMNITRONIC XPA-350 Amplifier

OMNITRONIC  E-200 MK2 Amplifier

продукт номер 10451051
информация
технически данни

Stereo PA amplifier with integrated limiter

  • 2 operating modes can be selected (stereo or bridged) with LED indicators
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Fan cooling
  • Signal inputs via XLR or RCA jacks, with XLR feed-through output
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:115 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 100 W
Stereo 8 ohms2 x 60 W
8 ohms bridged1 x 200 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>350
Distortion factor:0.1 %
Slew rate:40 V/µsec
S/N ratio:>90 dB
Channel seperation:>70 dB/ 1 kHz
Input sensitivity:0.77 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 1 x stereo RCA
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals, 2 x XLR (feed-through output)
Control elements:power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector
LED indicators:stereo, bridged (globally), protect, and 7-fold output meter with clip LED (per channel)
Protection circuits:short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):345 x 482 x 100 mm (19", 2 U)
Weight:8 kg
139,00 
в наличност до 10 седмици
This product has the successor:
OMNITRONIC XPA-2700 Amplifier

OMNITRONIC  E-2000 MK2 Amplifier

продукт номер 10451069
информация
технически данни

Stereo PA amplifier with integrated limiter

  • Class AB circuitry
  • 3 operating modes can be selected (stereo, parallel bridged)
  • Limiter, switchable
  • Speaker switch-on delay
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and 7-fold output meter with clip LED
  • Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
  • Groundlift switch against humming
  • Selectable input sensitivity
  • Fan cooling
  • Speaker outputs via lockable Speaker jacks and pairs of screw terminals
  • Signal inputs via XLR or 6.3 mm mounting jacks
  • Additional Speaker plug for 8-ohm bridge operation
  • 8-ohm bridge operation via screw terminals or additional Speaker plug
  • Rack installation
Power supply:230 V AC, 50 Hz
Power consumption:1700 W (1/8 power)
Power output sine:
Stereo 4 ohms2 x 1000 W
Stereo 8 ohms2 x 650 W
8 ohms bridged1 x 2000 W
Frequency range:10-50000 Hz, ±1.5 dB
Damping factor:>250
Distortion factor:0.1 %
Slew rate:30 V/µsec
S/N ratio:>90 dB
Input sensitivity:0.77 V/1.0 V/1.4 V
Input impedance:20 kohms
Input voltage:max. 21 dBV/9V
Input connectors:2 x XLR, 6.3 mm jack
Output connectors:2 x Speaker, 1 x Speaker (bridge), 2 x pairs of screw terminals
Control elements: power switch, level control per channel, mode switch, limiter switch, groundlift switch, input sensitivity switch
Protection circuits: short-circuit, overheat, DC voltage, power on/off transients, softstart
Construction:steel chassis with aluminum front panel
Dimensions (DxWxH):425 x 482 x 106 mm (19", 2 U)
Weight:15.5 kg
специална оферта, спестявате 19 %
валидно от 30.09.2016 до 31.01.2018
435,00 €
349,00 
в наличност до 7 седмици

OMNITRONIC  EDP-3600 Class D Amplifier

продукт номер 10451615
информация
технически данни

Stereo PA amplifier with integrated SMPS 2 x 1700 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:1050 W (1/8 power)
Power output (RMS):
stereo 4 ohms2 x 1700 W
stereo 8 ohms2 x 1000 W
8 ohms bridged1 x 3600 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>250
Distortion factor:<0.1 %
Slew rate:20 V/µsec
S/N ratio:>95 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, 2 x XLR feed-through output
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal, -6 dB, -12 dB, -18 dB, -25 dB (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
специална оферта, спестявате 20 %
валидно от 07.06.2017 до 31.01.2018
599,00 €
479,00 
в наличност до 12 седмици

OMNITRONIC  EDP-700 Class D Amplifier

продукт номер 10451612
информация
технически данни

Stereo PA amplifier with integrated SMPS 2 x 360 W

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Speaker switch-on delay and auto limiters
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload and VHF signals
  • Electronically balanced inputs via XLR mounting jacks
  • Speaker outputs via lockable Speaker plugs
  • Robust steel chassis with aluminum front panel
  • Rack installation with 1 unit
Power supply:100-240 V AC, 50/60 Hz
Power consumption:700 W
Power output sine:
stereo 4 ohms2 x 360 W
stereo 8 ohms2 x 200 W
8 ohms bridged1 x 720 W
Frequency range:20-20000 Hz, ±0.5 dB
Damping factor:>200
Distortion factor:0.05 %
Slew rate:20 V/µsec
S/N ratio:100 dB
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker (L/R), 1 x Speaker (bridge)
Circuitry:class D + PFC
Control elements:power switch, level control per channel, mode switch (stereo/bridged)
LED indicators:protect, clip, signal level (per channel)
Protection circuits:softstart, short-circuit, overheat, clipping, overload and VHF signals
Construction:steel chassis, aluminum front
Dimensions (DxWxH):250 x 483 x 44 mm (19", 1 U)
Weight:4.6 kg
269,00 
този артикул не е на разположение
Интересна алтернатива. Непременно погледнете
OMNITRONIC XPA-1800 Amplifier

PSSO  HP-1400 Amplifier

продукт номер 10451650
информация
технически данни

High-power amplifier 2 x 700 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:740 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 700 W
Stereo 8 ohms2 x 400 W
8 ohms bridged1 x 1400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:17 kg
485,00 
в наличност до 8 седмици
Интересна алтернатива. Непременно погледнете
OMNITRONIC XPA-2700 Amplifier

PSSO  HP-2400 Amplifier

продукт номер 10451651
информация
технически данни

High-power amplifier 2 x 1200 W/4 ohms

  • Class H technology
  • Power supply with softstart
  • High impulse stability
  • Stable metal housing
  • Plain design with aluminum front panel
  • Rack installation with 2 units
  • Complete protection set against overheat, overload, short-circuit, DC, softstart
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Electronically balanced inputs via XLR/Jack mounting sockets
  • Outputs via lockable Speaker-plugs
  • Operation mode visible via LED display for Signal, Protect and Clip
  • Calibrated input controls for exact level control, power switch
  • Ground Lift switch against humming
  • Bridged switch for bridging
  • 30 Hz Low Cut on the rear panel
  • Combines superior sound quality with highest reliabilty at significant lower weight
  • Stable permanent power for all models
  • Reliable power amp for a wide range of applications
Power supply:230 V AC, 50 Hz
Power consumption:1300 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1200 W
Stereo 8 ohms2 x 690 W
8 ohms bridged1 x 2400 W
Frequency range:20-20000 Hz
Signal-to-noise ratio:>88 dB
Total harmonic distortion:0.1 %
Damping factor:450
Voltage gain:34.3 dB
Slew rate:30 V/µsec.
Crosstalk:72 dB
Input sensitivity:0.77/1/1.4 V
Input impedance:10/20 kohms (bal./unbal.)
Input connectors:2 x XLR mounting socket
Output connectors:2 x Speaker (stereo), 1 x binding post (bridge)
Protection:Overheat, overload, short-circuit, DC, softstart
Cooling:2 fans
Controls:Power switch, input attenuators, mode switch (stereo/parallel/bridged), ground lift
Indicators:Signal, Clip, Protect, Power
Construction:Steel chassis, aluminum front panel
Dimensions:456 x 482 x 88 mm
Rack installation with 2 U
Weight:22 kg
специална оферта, спестявате 34 %
валидно от 20.01.2017 до 31.01.2018
699,00 €
461,34 
в наличност до 12 седмици

PSSO  HSP-1000 MK2 SMPS Amplifier

продукт номер 10451682
информация
технически данни

Stereo PA amplifier with integrated SMPS

  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:1000 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 500 W
Stereo 8 ohms2 x 310 W
8 ohms bridged1 x 1000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>80 dB
Total harmonic distortion:<0.1 %
Damping factor:>200
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, switchable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 400 x 89 mm
Rack installation with 2 U
Weight:8 kg
439,00 
в наличност до 12 седмици

PSSO  HSP-2800 MK2 SMPS Amplifier

продукт номер 10451690
информация
технически данни

Stereo PA amplifier with integrated SMPS

  • Stereo PA amplifier with class H circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity and limiter adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • LEDs for parallel and bridge mode
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
Power supply:230 V AC, 50 Hz
Power consumption:1500 W (1/8 power)
Power output (RMS):
Stereo 4 ohms2 x 1400 W
Stereo 8 ohms2 x 850 W
8 ohms bridged1 x 3000 W
Frequency range:20-20000 Hz
Signal-to-Noise ratio:>90 dB
Total harmonic distortion:<0.1 %
Damping factor:>300
Voltage gain:38 dB
Slew rate:>20 V/µsec
Crosstalk:>70 dB
Input sensitivity:32 dB/1.0 V/0.775 V, swtichable
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:2 x XLR
Output connectors:2 x Speaker, screw terminals, 2 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:parallel, bridge (globally), protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Dimensions:483 x 505 x 89 mm
Rack installation with 2 U
Weight:13 kg
829,00 
в наличност до 12 седмици
1 2 3 4
Last seen products
Your request was successful sent.
Loader
Please wait while the page is loading...

We use cookies to ensure you get the best user experience on our website. By continuing, you accept the cookie use