PSSO Amp Set MK2 for Line-Array L
1x 10451695: PSSO QDA-4400 4-Channel Amplifier
1x 10451696: PSSO QCA-6400 4-Channel SMPS Amplifier
1x 10451697: PSSO QCA-10000 4-Channel SMPS Amplifier
1x 10356364: PSSO DXO-48 PRO Digital Controller
1x 30100150: OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
1x 30109192: ROADINGER Rack Profi KM 8U 55cm with wheels
10451695 PSSO QDA-4400 4-Channel Amplifier
- PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms
- 4-channel PA amplifier with class D circuitry
- 4 x 1100 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
- PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 1400 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
10451697 PSSO QCA-10000 4-Channel SMPS Amplifier
- PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 2100 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
10356364 PSSO DXO-48 PRO Digital Controller
- Digital speaker management system with real-time network communication, 4 inputs and 8 outputs
- Digital network speaker management system with 64-bit processing
- Premium components ensure excellent sound-features
- Flexible routing configurations for all standard mono and stereo output operating modes
- 4 analog inputs and 1digital AES/EBU interface (XLR)
- 8 analog outputs (XLR)
- Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
- 10-band parametric EQ per input and output
- Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
- Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
- The intelligent software for PC and Mac allows convenient control with a computer
- Full configuration and real-time network communication via the built-in Ethernet interface
- Up to 80 user presets storable in the device via software
- Control of all functions also possible via the controls at the front panel
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit VU meter
- Mute switch with LED indicator per output
- Up to 2000 ms signal delay adjustable for the inputs and outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase (180°)
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
- Control your speaker systems more flexible than ever with the DXO Control app
- DXO Control for iPad supports all functions of the PC software and is available for free from the app store
- Made in Germany
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
- U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels
- PRO flightcase for 483 mm units (19")
- Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
- Stomped profile rails for cage nuts
- 2 removable covers (double-door version)
- High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 4 x recessed case handles with mounting dish and backing ring
- 4 butterfly lock
- 4 wheels with 2 brakes
- 4 x chrome case handles
- Available in different height units (1 U = 44 mm)
- Made in Europe
10451695 PSSO QDA-4400 4-Channel Amplifier | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 830 W (1/8 power) |
Power output (RMS): | |
Stereo, parallel at 4 ohms | 4 x 1100 W |
Stereo, parallel at 8 ohms | 4 x 650 W |
8 ohms bridged | 2 x 2000 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >100 dB |
Total harmonic distortion: | <0.1 % |
Damping factor: | >500 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.81 V or 39.3 dB/37 dB/32 dB, switchable |
Voltage gain: | 39.3 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Circuitry: | Class D |
Protection: | Soft start, short circuit, over load, over heat, clip limit, RF and VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, level control, mode switch (stereo,parallel,bridged), input sensitivity |
LED indicators: | protect, clip, signal, -5 dB, -10 dB, -20 dB (per channel), dB/V mode |
Construction: | Steel chassis, aluminum front |
Dimensions: | 483 x 461 x 91 mm |
rack installation with 2 U | |
Weight: | 9.2 kg |
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 820 W (1/8 power) |
Power output (RMS): | |
2 ohms | 4 x 1600 W |
4 ohms | 4 x 1400 W |
8 ohms | 4 x 800 W |
4 ohms bridged | 2 x 3200 W |
8 ohms bridged | 2 x 2800 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >80 dB |
Total harmonic distortion: | <0.05 % |
Damping factor: | >800 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable |
Voltage gain: | 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V) |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, | VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | Protect, clip, signal (per channel) |
Construction: | Steel chassis, aluminum front panel |
Dimensions: | 483 x 445 x 89 mm |
Rack installation with 2 U | |
Weight: | 15.5 kg |
10451697 PSSO QCA-10000 4-Channel SMPS Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 1150 W (1/8 power) |
Power output (RMS): | |
2 ohms | 4 x 2500 W |
4 ohms | 4 x 2100 W |
8 ohms | 4 x 1300 W |
4 ohms bridged | 2 x 5000 W |
8 ohms bridged | 2 x 4200 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >80 dB |
Total harmonic distortion: | <0.05 % |
Damping factor: | >800 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable |
Voltage gain: | 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V) |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, | VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | Protect, clip, signal (per channel) |
Construction: | Steel chassis, aluminum front panel |
Dimensions: | 483 x 445 x 89 mm |
Rack installation with 2 U | |
Weight: | 15.7 kg |
10356364 PSSO DXO-48 PRO Digital Controller | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 10 W |
Inputs: | 4 x XLR, balanced |
Maximum input level: | +22 dBu |
Input impedance: | 10 kohms |
Dynamic range: | 118 dBA |
Digital input: | 1 x AES/EBU (XLR) |
Input impedance: | 110 ohms |
Outputs: | 8 x XLR, balanced |
Output impedance: | 50 ohms (electronically balanced) |
Output gain range: | -50 to +12 dB |
Maximum output level: | +12 dBu |
Dynamic range: | 118 dBA |
Frequency range: | 10-40000 Hz |
Sampling frequency: | 65 kHz |
Distortion: | 0.005 % |
Filter types: | Bessel, Butterworth or Linkwitz-Riley |
Slopes: | 6, 12, 18 or 24 dB/octave |
Crossover frequency: | 20-20000 Hz |
Delay: | 0 to 2000 ms (inputs/outputs) |
Communication: | LAN (TCP/IP), USB type B |
Dimensions (W x D x H): | 482 x 44 x 223 mm |
Weight: | 2.7 kg |
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels | |
Maximum load: | 100 kg |
Strength: | 9 mm |
Outside dimensions (W x D x H): | 530 x 710 x 520 mm |
Inside dimensions: | |
Mounting width: | 483 mm (19") |
Mounting height: | 360 mm (8 U) |
Mounting depth: | 550 mm |
Corner dimensions: | 65 mm |
Weight: | 21.5 kg |
PSSO Amp Set MK2 for Line-Array M
1x 10451685: PSSO DDA-2500 Amplifier
1x 10451695: PSSO QDA-4400 4-Channel Amplifier
1x 10451696: PSSO QCA-6400 4-Channel SMPS Amplifier
1x 10356362: PSSO DXO-26 PRO Digital Controller
1x 30100150: OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
1x 30109192: ROADINGER Rack Profi KM 8U 55cm with wheels
10451685 PSSO DDA-2500 Amplifier
- Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Limiter and speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 2 calibrated level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs and screw terminals
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
10451695 PSSO QDA-4400 4-Channel Amplifier
- PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms
- 4-channel PA amplifier with class D circuitry
- 4 x 1100 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
- PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 1400 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
10356362 PSSO DXO-26 PRO Digital Controller
- Digital speaker management system with real-time network communication, 2 inputs and 6 outputs
- Digital network speaker management system with 64-bit processing
- Premium components ensure excellent sound-features
- Flexible routing configurations for all standard mono and stereo output operating modes
- 2 analog inputs and 1digital AES/EBU interface (XLR)
- 6 analog outputs (XLR)
- 10-band parametric EQ per input and output
- Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
- Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
- The intelligent software for PC and Mac allows convenient control with a computer
- Full configuration and real-time network communication via the built-in Ethernet interface
- Up to 80 user presets storable in the device via software
- Control of all functions also possible via the controls at the front panel
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit VU meter
- Mute switch with LED indicator per output
- Up to 2000 ms signal delay adjustable for the inputs and outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase (180°)
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
- Control your speaker systems more flexible than ever with the DXO Control app
- DXO Control for iPad supports all functions of the PC software and is available for free from the app store
- Made in Germany
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
- U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels
- PRO flightcase for 483 mm units (19")
- Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
- Stomped profile rails for cage nuts
- 2 removable covers (double-door version)
- High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 4 x recessed case handles with mounting dish and backing ring
- 4 butterfly lock
- 4 wheels with 2 brakes
- 4 x chrome case handles
- Available in different height units (1 U = 44 mm)
- Made in Europe
10451685 PSSO DDA-2500 Amplifier | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 200 W (1/8 power) |
Power output (RMS): | |
Stereo, parallel at 4 ohms | 2 x 1250 W |
Stereo, parallel at 8 ohms | 2 x 700 W |
8 ohms bridged | 1 x 2500 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >100 dB |
Total harmonic distortion: | <0.15 % |
Damping factor: | >500 |
Voltage gain: | 39.7 dB |
Slew rate: | >10 V/µsec |
Input sensitivity: | 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Circuitry: | Class D |
Protection: | Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | protect, clip, - 5 dB, - 10 dB, - 20 dB (per channel) |
Construction: | steel chassis, aluminum front |
Dimensions: | 483 x 461 x 89 mm |
Rack installation with 2 U | |
Weight: | 7.5 kg |
10451695 PSSO QDA-4400 4-Channel Amplifier | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 830 W (1/8 power) |
Power output (RMS): | |
Stereo, parallel at 4 ohms | 4 x 1100 W |
Stereo, parallel at 8 ohms | 4 x 650 W |
8 ohms bridged | 2 x 2000 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >100 dB |
Total harmonic distortion: | <0.1 % |
Damping factor: | >500 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.81 V or 39.3 dB/37 dB/32 dB, switchable |
Voltage gain: | 39.3 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Circuitry: | Class D |
Protection: | Soft start, short circuit, over load, over heat, clip limit, RF and VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, level control, mode switch (stereo,parallel,bridged), input sensitivity |
LED indicators: | protect, clip, signal, -5 dB, -10 dB, -20 dB (per channel), dB/V mode |
Construction: | Steel chassis, aluminum front |
Dimensions: | 483 x 461 x 91 mm |
rack installation with 2 U | |
Weight: | 9.2 kg |
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 820 W (1/8 power) |
Power output (RMS): | |
2 ohms | 4 x 1600 W |
4 ohms | 4 x 1400 W |
8 ohms | 4 x 800 W |
4 ohms bridged | 2 x 3200 W |
8 ohms bridged | 2 x 2800 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >80 dB |
Total harmonic distortion: | <0.05 % |
Damping factor: | >800 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable |
Voltage gain: | 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V) |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, | VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | Protect, clip, signal (per channel) |
Construction: | Steel chassis, aluminum front panel |
Dimensions: | 483 x 445 x 89 mm |
Rack installation with 2 U | |
Weight: | 15.5 kg |
10356362 PSSO DXO-26 PRO Digital Controller | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 10 W |
Analog inputs: | 2 x XLR, balanced |
Maximum input level: | +22 dBu |
Input impedance: | 10 kohms |
Dynamic range: | 118 dBA |
Digital input: | 1 x AES/EBU (XLR) |
Input impedance: | 110 ohms |
Outputs: | 6 x XLR, balanced |
Output impedance: | 50 ohms (electronically balanced) |
Output gain range: | -50 to +12 dB |
Maximum output level: | +12 dBu |
Dynamic range: | 118 dBA |
Frequency range: | 10-40000 Hz |
Sampling frequency: | 65 kHz |
Distortion: | 0.005 % |
Filter types: | Bessel, Butterworth or Linkwitz-Riley |
Slopes: | 6, 12, 18 or 24 dB/octave |
Crossover frequency: | 20-20000 Hz |
Delay: | 0 to 2000 ms (inputs/outputs) |
Communication: | LAN (TCP/IP), USB type B |
Dimensions (W x D x H): | 482 x 44 x 223 mm |
Weight: | 2.5 kg |
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels | |
Maximum load: | 100 kg |
Strength: | 9 mm |
Outside dimensions (W x D x H): | 530 x 710 x 520 mm |
Inside dimensions: | |
Mounting width: | 483 mm (19") |
Mounting height: | 360 mm (8 U) |
Mounting depth: | 550 mm |
Corner dimensions: | 65 mm |
Weight: | 21.5 kg |
PSSO Amp Set MK2 for Line-Array S
1x 10451684: PSSO DDA-1700 Amplifier
1x 10451696: PSSO QCA-6400 4-Channel SMPS Amplifier
1x 10356362: PSSO DXO-26 PRO Digital Controller
1x 30100150: OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
1x 30109190: ROADINGER Rack Profi KM 6U 55cm with wheels
10451684 PSSO DDA-1700 Amplifier
- Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Limiter and speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 2 calibrated level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs and screw terminals
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
- PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 1400 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Highly efficient front-to-rear air routing
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
10356362 PSSO DXO-26 PRO Digital Controller
- Digital speaker management system with real-time network communication, 2 inputs and 6 outputs
- Digital network speaker management system with 64-bit processing
- Premium components ensure excellent sound-features
- Flexible routing configurations for all standard mono and stereo output operating modes
- 2 analog inputs and 1digital AES/EBU interface (XLR)
- 6 analog outputs (XLR)
- 10-band parametric EQ per input and output
- Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
- Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
- The intelligent software for PC and Mac allows convenient control with a computer
- Full configuration and real-time network communication via the built-in Ethernet interface
- Up to 80 user presets storable in the device via software
- Control of all functions also possible via the controls at the front panel
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit VU meter
- Mute switch with LED indicator per output
- Up to 2000 ms signal delay adjustable for the inputs and outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase (180°)
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
- Control your speaker systems more flexible than ever with the DXO Control app
- DXO Control for iPad supports all functions of the PC software and is available for free from the app store
- Made in Germany
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
- U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
30109190 ROADINGER Rack Profi KM 6U 55cm with wheels
- PRO flightcase for 483 mm units (19")
- Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
- Stomped profile rails for cage nuts
- 2 removable covers (double-door version)
- High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 2 x recessed case handles with mounting dish and backing ring
- 4 butterfly lock
- 4 wheels with 2 brakes
- 4 x chrome case handles
- Available in different height units (1 U = 44 mm)
- Made in Europe
10451684 PSSO DDA-1700 Amplifier | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 150 W (1/8 power) |
Power output (RMS): | |
Stereo, parallel at 4 ohms | 2 x 850 W |
Stereo, parallel at 8 ohms | 2 x 500 W |
8 ohms bridged | 1 x 1700 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >100 dB |
Total harmonic distortion: | <0.15 % |
Damping factor: | >500 |
Voltage gain: | 38.2 dB |
Slew rate: | >10 V/µsec |
Input sensitivity: | 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Circuitry: | Class D |
Protection: | Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | protect, clip, -5 dB, -10 dB, -20 dB (per channel) |
Construction: | steel chassis, aluminum front |
Dimensions: | 483 x 461 x 89 mm |
Rack installation with 2 U | |
Weight: | 7 kg |
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 820 W (1/8 power) |
Power output (RMS): | |
2 ohms | 4 x 1600 W |
4 ohms | 4 x 1400 W |
8 ohms | 4 x 800 W |
4 ohms bridged | 2 x 3200 W |
8 ohms bridged | 2 x 2800 W |
Frequency range: | 20-20000 Hz |
Signal-to-Noise ratio: | >80 dB |
Total harmonic distortion: | <0.05 % |
Damping factor: | >800 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable |
Voltage gain: | 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V) |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, | VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity |
LED indicators: | Protect, clip, signal (per channel) |
Construction: | Steel chassis, aluminum front panel |
Dimensions: | 483 x 445 x 89 mm |
Rack installation with 2 U | |
Weight: | 15.5 kg |
10356362 PSSO DXO-26 PRO Digital Controller | |
Power supply: | 100-240 V AC, 50/60 Hz |
Power consumption: | 10 W |
Analog inputs: | 2 x XLR, balanced |
Maximum input level: | +22 dBu |
Input impedance: | 10 kohms |
Dynamic range: | 118 dBA |
Digital input: | 1 x AES/EBU (XLR) |
Input impedance: | 110 ohms |
Outputs: | 6 x XLR, balanced |
Output impedance: | 50 ohms (electronically balanced) |
Output gain range: | -50 to +12 dB |
Maximum output level: | +12 dBu |
Dynamic range: | 118 dBA |
Frequency range: | 10-40000 Hz |
Sampling frequency: | 65 kHz |
Distortion: | 0.005 % |
Filter types: | Bessel, Butterworth or Linkwitz-Riley |
Slopes: | 6, 12, 18 or 24 dB/octave |
Crossover frequency: | 20-20000 Hz |
Delay: | 0 to 2000 ms (inputs/outputs) |
Communication: | LAN (TCP/IP), USB type B |
Dimensions (W x D x H): | 482 x 44 x 223 mm |
Weight: | 2.5 kg |
30109190 ROADINGER Rack Profi KM 6U 55cm with wheels | |
Maximum load: | 50 kg |
Strength: | 9 mm |
Outside dimensions (W x D x H): | 530 x 710 x 430 mm |
Inside dimensions: | |
Mounting width: | 483 mm (19") |
Mounting height: | 275 mm (6 U) |
Mounting depth: | 550 mm |
Corner dimensions: | 65 mm |
Weight: | 20 kg |
PSSO PA Set PRO M MK2
2x 11041098: PSSO K-208 2-Way Top 200W
2x 11041130: PSSO K-122 Subwoofer 800W
1x 10356321: OMNITRONIC DXO-24E Digital Controller
2x 60004554: OMNITRONIC Distance Tube Subwoofer/Satellite 120cm
1x 30109784: ROADINGER Amplifier Rack PR-2, 4U, 47cm deep
4x 3022790C: PSSO Speaker cable Speakon 2x1.5 5m bk
4x 30227840: PSSO XLR cable 3pin 1m bk Neutrik
1x 30100150: OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
2x 59007073: EUROLITE SPA-10L Adapter
1x 10451635: OMNITRONIC XDA-1002 Class D Amplifier
1x 10451636: OMNITRONIC XDA-2402 Class D Amplifier
11041098 PSSO K-208 2-Way Top 200W
- Pro PA speaker with 8" woofer, 1" horn and 200 W RMS, 8 ohms
- Rugged full-range top speaker, qualified for suspension and touring applications
- Housing made of 15 mm birch plywood
- 20 cm (8") bass speaker with diecast aluminum basket
- Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
- Premium custom-made drivers by European manufacturer CELTO Acoustique
- Passive 2-way crossover
- Bassreflex system
- Parallel Neutrik Speakon connectors
- M10 thread for Omnimount wall brackets
- Adapter for stand installation available as accessory (SPA-10L)
- Trapezoidal multi-functional housing with scratch-resistant lacquer surface
- Impact-resistant steel grille with acoustic foam
- Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
11041130 PSSO K-122 Subwoofer 800W
- Pro PA bassreflex sub, 2 x 12" woofer, 800 W RMS, 4 ohms
- Rugged pro bassreflex subwoofer, qualified for touring applications
- Housing made of birch plywood
- 2 x 30 cm (12") bass speaker with steel sheet basket
- Premium custom-made drivers by European manufacturer CELTO Acoustique
- Parallel Neutrik Speakon connectors
- Metal flange for top speakers
- Carrying handles and rubber feet
- Scratch-resistant lacquer surface
- Impact-resistant steel grille with acoustic foam
10356321 OMNITRONIC DXO-24E Digital Controller
- Digital stereo active crossover with 2 inputs and 4 outputs, incl. software
- Flexible routing configurations for all standard mono and stereo output operating modes
- 2 analog inputs and 4 analog outputs (XLR)
- Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
- Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
- Up to 30 user presets storable in the device via software
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
- Mute switch with LED indicator per output
- 7-band parametric EQ per output
- Up to 7 ms signal delay adjustable for the outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7 and Mac OS X 10.5.8 and better
60004554 OMNITRONIC Distance Tube Subwoofer/Satellite 120cm
- Distance tube
- Connecting tube for satellite systems
- For stand inserts with standard diameter (35 mm)
- Powder-coated steel version
- Available in different sizes
- Color: black
30109784 ROADINGER Amplifier Rack PR-2, 4U, 47cm deep
- Flightcase for 483 mm units (19")
- Profile rails with 4 U mounting facility for 483 mm units (19"), e.g. PA amplifiers, power packs, additional equipment
- Front and rear rack rails
- 2 removable covers (double-door version)
- Max. depth 420 mm (plus 90 mm per cover)
- High-quality workmanship with plywood multilayered glued, black laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 4 high-quality butterfly locks (w/o locking function)
- 2 wooden slide rails on the bottom
- 2 hinged, chrome case handles
- Delivery includes mounting screws
- Available in different height units (1 U = 44 mm)
3022790C PSSO Speaker cable Speakon 2x1.5 5m bk
- High-quality speaker cable
- With Neutrik plugs from Liechtenstein
- Cable from German production
- 2 pole speaker cable
- With Neutrik Speakon cable plugs
- Cable cross-section: 1.5 mm²
- Cable length: 5 m
- Cable diameter: 7 mm
- Weight: 0.5 kg
- Made in Germany
30227840 PSSO XLR cable 3pin 1m bk Neutrik
- Dependable microphone cable
- High quality connection for microphones etc.
- High conductivity
- Slim and short construction
- Made in Germany
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
- U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
59007073 EUROLITE SPA-10L Adapter
- For 36 mm tube with large mounting plate, max. load WLL 100 kg
- Adapter for installing a spot light on a stand with 35 mm telescopic tube
- M10 wing bolt
10451635 OMNITRONIC XDA-1002 Class D Amplifier
- Stereo PA amplifier with SMPS, 2 x 510 W / 4 ohms, 2 x 300 W / 8 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Speaker switch-on delay and auto limiters
- 2 operating modes can be selected (stereo or bridged)
- 2 level controls
- LEDs for activated protective circuit, limiter, signal, and power
- Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, soft start
- Ground lift switch against humming
- Fan cooling
- Electronically balanced inputs via XLR mounting jacks with feed-through output
- Speaker outputs via lockable speaker jacks
- Rack installation with 1 unit
10451636 OMNITRONIC XDA-2402 Class D Amplifier
- Stereo PA amplifier with SMPS, 2 x 1200 W / 4 ohms, 2 x 880 W / 8 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Speaker switch-on delay and auto limiters
- 2 level controls
- LEDs for activated protective circuit, limiter, signal, and power
- Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, soft start
- Ground lift switch against humming
- Fan cooling
- Electronically balanced inputs via XLR mounting jacks with feed-through output
- Speaker outputs via lockable speaker jacks
- Rack installation with 1 unit
11041098 PSSO K-208 2-Way Top 200W | |
Rated power: | 200 W RMS |
Components: | 20 cm woofer (8"), 2.5 cm horn (1") |
Connection: | 2 x Speakon |
Sensitivity: | 95 dB |
Maximum SPL: | 124 dB |
Impedance: | 8 ohms |
Frequency range: | 57-20000 Hz |
Crossover frequency: | 1.8 kHz |
Dispersion angle: | 90° x 60° |
Dimensions (H x W x D): | 270 x 445 x 270 mm |
Weight: | 12 kg |
11041130 PSSO K-122 Subwoofer 800W | |
Rated power: | 800 W RMS |
Components: | 2 x 30 cm woofer (2 x 12") |
Connection: | 2 x Speakon |
Sensitivity: | 97 dB |
Maximum SPL: | 132 dB |
Impedance: | 4 ohms |
Frequency range: | 37-1500 Hz |
Dimensions (H x W x D): | 370 x 750 x 500 mm |
Weight: | 36 kg |
10356321 OMNITRONIC DXO-24E Digital Controller | |
Power supply: | 100-240 V AC, 50/60 Hz |
via power unit included in the delivery | |
Inputs: | 2 x XLR, balanced |
Maximum input level: | +22 dBu |
Input impedance: | 10 kohms |
Dynamic range: | 114 dBA |
Outputs: | 4 x XLR, balanced |
Output impedance: | 50 ohms (electronically balanced) |
Output gain range: | -50 to +12 dB |
Maximum output level: | +9 dBu |
Dynamic range: | 110 dBA |
Sampling frequency: | 67 kHz |
Frequency range: | 10-30000 Hz |
Distortion: | 0.005 % |
Filter types: | Bessel, Butterworth or Linkwitz-Riley |
Slopes: | 6, 12, 18 or 24 dB/octave |
Crossover frequency: | 20-20000 Hz |
Delay: | 0-5 msec |
Communication: | USB type B |
Dimensions (WxHxD): | 482 x 44 x 128 mm |
Weight: | 1.6 kg |
60004554 OMNITRONIC Distance Tube Subwoofer/Satellite 120cm | |
Maximum load: | 35 kg |
Height: | 120 cm |
Weight: | 1 kg |
30109784 ROADINGER Amplifier Rack PR-2, 4U, 47cm deep | |
Maximum load: | 25 kg |
Strength: | 7 mm |
Outside dimensions (W x D x H): | 545 x 640 x 220 mm |
Inside dimensions: | |
Mounting width: | 483 mm (19") |
Mounting height: | 180 mm (4 U) |
Mounting depth: | 420 mm (90 mm per cover) |
Exterior corner dimensions: | 64 mm |
Weight: | 10 kg |
3022790C PSSO Speaker cable Speakon 2x1.5 5m bk | |
Cable length: | 5 m |
Color: | Black |
Plug A: | 1 x 2-pole Speakon (M) |
Plug B: | 1 x 2-pole Speakon (M) |
30227840 PSSO XLR cable 3pin 1m bk Neutrik | |
Cable length: | 1 m |
Color: | Black |
Plug A: | 1 x 3-pole XLR (M) |
Plug B: | 1 x 3-pole XLR (F) |
59007073 EUROLITE SPA-10L Adapter | |
Maximum load WLL (4-fold): | 100 kg |
Maximum load BGV C1 (8-fold): | 50 kg |
Receiver: | D = 36.5 mm |
Receiver: | L = 120 mm |
Strength: | 1 mm |
Mounting plate: | D = 120 mm |
Mounting plate: | Thickness 3 mm |
Thread: | M10 x 50 mm |
Dimensions (L x W x H): | 120 x 120 x 170 mm |
Weight: | 0.5 kg |
10451635 OMNITRONIC XDA-1002 Class D Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 210 W (1/8 power) |
Power output (RMS): | |
stereo 4 ohms | 2 x 510 W |
stereo 8 ohms | 2 x 300 W |
8 ohms bridged | 1 x 1000 W |
Frequency range: | 30-20000 Hz |
Distortion factor: | <0.02 % |
Voltage gain: | 36 dB at 8 ohms |
S/N ratio: | >100 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input sensitivity: | 1.25 V RMS |
Input connectors: | 2 x XLR |
Output connectors: | 2 x Speaker, 2 x XLR feed-through output |
Circuitry: | class D |
Control elements: power switch, level control per channel, mode switch | (stereo/bridged), ground lift switch |
LED indicators: | Protect, limit, signal, power |
Protection circuits: | Short-circuit, overheat, DC voltage, power on/off |
transients, softstart | |
Construction: | steel chassis |
Dimensions (DxWxH): | 240 x 483 x 44 mm (19", 1 U) |
Weight: | 4 kg |
10451636 OMNITRONIC XDA-2402 Class D Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 465(1/8 power) |
Power output (RMS): | |
stereo 4 ohms | 2 x 1200 |
stereo 8 ohms | 2 x 880 |
Frequency range: | 30-20000 Hz |
Distortion factor: | <0.02 % |
Voltage gain: | 36 dB at 8 ohms |
S/N ratio: | >100 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input sensitivity: | 1.25 V RMS |
Input connectors: | 2 x XLR |
Output connectors: | 2 x Speaker, 2 x XLR feed-through output |
Circuitry: | class D |
Control elements: | power switch, level control per channel, ground lift switch |
LED indicators: | Protect, limit, signal, power |
Protection circuits: | Short-circuit, overheat, DC voltage, power on/off |
transients, softstart | |
Construction: | steel chassis |
Dimensions (DxWxH): | 355 x 483 x 44 mm (19", 1 U) |
Weight: | 6.4 kg |
PSSO PA Set PRO S MK2
2x 11041098: PSSO K-208 2-Way Top 200W
2x 11041126: PSSO K-121 Subwoofer 400W
1x 10356321: OMNITRONIC DXO-24E Digital Controller
2x 60004554: OMNITRONIC Distance Tube Subwoofer/Satellite 120cm
1x 30109784: ROADINGER Amplifier Rack PR-2, 4U, 47cm deep
4x 3022790C: PSSO Speaker cable Speakon 2x1.5 5m bk
4x 30227840: PSSO XLR cable 3pin 1m bk Neutrik
1x 30100150: OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
2x 59007073: EUROLITE SPA-10L Adapter
1x 10451635: OMNITRONIC XDA-1002 Class D Amplifier
1x 10451636: OMNITRONIC XDA-2402 Class D Amplifier
11041098 PSSO K-208 2-Way Top 200W
- Pro PA speaker with 8" woofer, 1" horn and 200 W RMS, 8 ohms
- Rugged full-range top speaker, qualified for suspension and touring applications
- Housing made of 15 mm birch plywood
- 20 cm (8") bass speaker with diecast aluminum basket
- Rotatable 25 mm constant directivity horn tweeter (1", 44 mm voice coil)
- Premium custom-made drivers by European manufacturer CELTO Acoustique
- Passive 2-way crossover
- Bassreflex system
- Parallel Neutrik Speakon connectors
- M10 thread for Omnimount wall brackets
- Adapter for stand installation available as accessory (SPA-10L)
- Trapezoidal multi-functional housing with scratch-resistant lacquer surface
- Impact-resistant steel grille with acoustic foam
- Applications: standing, as monitor, on a subwoofer or speaker stand, suspended
11041126 PSSO K-121 Subwoofer 400W
- Pro PA bassreflex sub, 12" woofer, 400 W RMS, 8 ohms
- Rugged pro bassreflex subwoofer, qualified for touring applications
- Housing made of birch plywood
- 30 cm (12") bass speaker with steel sheet basket
- Premium custom-made drivers by European manufacturer CELTO Acoustique
- Parallel Neutrik Speakon connectors
- Metal flange for top speakers
- Carrying handles and rubber feet
- Matching castors optionally available
- Scratch-resistant lacquer surface
- Impact-resistant steel grille with acoustic foam
10356321 OMNITRONIC DXO-24E Digital Controller
- Digital stereo active crossover with 2 inputs and 4 outputs, incl. software
- Flexible routing configurations for all standard mono and stereo output operating modes
- 2 analog inputs and 4 analog outputs (XLR)
- Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
- Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
- Up to 30 user presets storable in the device via software
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
- Mute switch with LED indicator per output
- 7-band parametric EQ per output
- Up to 7 ms signal delay adjustable for the outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7 and Mac OS X 10.5.8 and better
60004554 OMNITRONIC Distance Tube Subwoofer/Satellite 120cm
- Distance tube
- Connecting tube for satellite systems
- For stand inserts with standard diameter (35 mm)
- Powder-coated steel version
- Available in different sizes
- Color: black
30109784 ROADINGER Amplifier Rack PR-2, 4U, 47cm deep
- Flightcase for 483 mm units (19")
- Profile rails with 4 U mounting facility for 483 mm units (19"), e.g. PA amplifiers, power packs, additional equipment
- Front and rear rack rails
- 2 removable covers (double-door version)
- Max. depth 420 mm (plus 90 mm per cover)
- High-quality workmanship with plywood multilayered glued, black laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 4 high-quality butterfly locks (w/o locking function)
- 2 wooden slide rails on the bottom
- 2 hinged, chrome case handles
- Delivery includes mounting screws
- Available in different height units (1 U = 44 mm)
3022790C PSSO Speaker cable Speakon 2x1.5 5m bk
- High-quality speaker cable
- With Neutrik plugs from Liechtenstein
- Cable from German production
- 2 pole speaker cable
- With Neutrik Speakon cable plugs
- Cable cross-section: 1.5 mm²
- Cable length: 5 m
- Cable diameter: 7 mm
- Weight: 0.5 kg
- Made in Germany
30227840 PSSO XLR cable 3pin 1m bk Neutrik
- Dependable microphone cable
- High quality connection for microphones etc.
- High conductivity
- Slim and short construction
- Made in Germany
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
- U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
59007073 EUROLITE SPA-10L Adapter
- For 36 mm tube with large mounting plate, max. load WLL 100 kg
- Adapter for installing a spot light on a stand with 35 mm telescopic tube
- M10 wing bolt
10451635 OMNITRONIC XDA-1002 Class D Amplifier
- Stereo PA amplifier with SMPS, 2 x 510 W / 4 ohms, 2 x 300 W / 8 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Speaker switch-on delay and auto limiters
- 2 operating modes can be selected (stereo or bridged)
- 2 level controls
- LEDs for activated protective circuit, limiter, signal, and power
- Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, soft start
- Ground lift switch against humming
- Fan cooling
- Electronically balanced inputs via XLR mounting jacks with feed-through output
- Speaker outputs via lockable speaker jacks
- Rack installation with 1 unit
10451636 OMNITRONIC XDA-2402 Class D Amplifier
- Stereo PA amplifier with SMPS, 2 x 1200 W / 4 ohms, 2 x 880 W / 8 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Speaker switch-on delay and auto limiters
- 2 level controls
- LEDs for activated protective circuit, limiter, signal, and power
- Complete protection set against short-circuit, overheat, DC voltage, power on/off transients, soft start
- Ground lift switch against humming
- Fan cooling
- Electronically balanced inputs via XLR mounting jacks with feed-through output
- Speaker outputs via lockable speaker jacks
- Rack installation with 1 unit
11041098 PSSO K-208 2-Way Top 200W | |
Rated power: | 200 W RMS |
Components: | 20 cm woofer (8"), 2.5 cm horn (1") |
Connection: | 2 x Speakon |
Sensitivity: | 95 dB |
Maximum SPL: | 124 dB |
Impedance: | 8 ohms |
Frequency range: | 57-20000 Hz |
Crossover frequency: | 1.8 kHz |
Dispersion angle: | 90° x 60° |
Dimensions (H x W x D): | 270 x 445 x 270 mm |
Weight: | 12 kg |
11041126 PSSO K-121 Subwoofer 400W | |
Rated power: | 400 W RMS |
Components: | 30 cm woofer (12") |
Connection: | 2 x Speakon |
Sensitivity: | 94 dB |
Maximum SPL: | 127 dB |
Impedance: | 8 ohms |
Frequency range: | 40-1500 Hz |
Dimensions (H x W x D): | 370 x 440 x 500 mm |
Weight: | 21 kg |
10356321 OMNITRONIC DXO-24E Digital Controller | |
Power supply: | 100-240 V AC, 50/60 Hz |
via power unit included in the delivery | |
Inputs: | 2 x XLR, balanced |
Maximum input level: | +22 dBu |
Input impedance: | 10 kohms |
Dynamic range: | 114 dBA |
Outputs: | 4 x XLR, balanced |
Output impedance: | 50 ohms (electronically balanced) |
Output gain range: | -50 to +12 dB |
Maximum output level: | +9 dBu |
Dynamic range: | 110 dBA |
Sampling frequency: | 67 kHz |
Frequency range: | 10-30000 Hz |
Distortion: | 0.005 % |
Filter types: | Bessel, Butterworth or Linkwitz-Riley |
Slopes: | 6, 12, 18 or 24 dB/octave |
Crossover frequency: | 20-20000 Hz |
Delay: | 0-5 msec |
Communication: | USB type B |
Dimensions (WxHxD): | 482 x 44 x 128 mm |
Weight: | 1.6 kg |
60004554 OMNITRONIC Distance Tube Subwoofer/Satellite 120cm | |
Maximum load: | 35 kg |
Height: | 120 cm |
Weight: | 1 kg |
30109784 ROADINGER Amplifier Rack PR-2, 4U, 47cm deep | |
Maximum load: | 25 kg |
Strength: | 7 mm |
Outside dimensions (W x D x H): | 545 x 640 x 220 mm |
Inside dimensions: | |
Mounting width: | 483 mm (19") |
Mounting height: | 180 mm (4 U) |
Mounting depth: | 420 mm (90 mm per cover) |
Exterior corner dimensions: | 64 mm |
Weight: | 10 kg |
3022790C PSSO Speaker cable Speakon 2x1.5 5m bk | |
Cable length: | 5 m |
Color: | Black |
Plug A: | 1 x 2-pole Speakon (M) |
Plug B: | 1 x 2-pole Speakon (M) |
30227840 PSSO XLR cable 3pin 1m bk Neutrik | |
Cable length: | 1 m |
Color: | Black |
Plug A: | 1 x 3-pole XLR (M) |
Plug B: | 1 x 3-pole XLR (F) |
59007073 EUROLITE SPA-10L Adapter | |
Maximum load WLL (4-fold): | 100 kg |
Maximum load BGV C1 (8-fold): | 50 kg |
Receiver: | D = 36.5 mm |
Receiver: | L = 120 mm |
Strength: | 1 mm |
Mounting plate: | D = 120 mm |
Mounting plate: | Thickness 3 mm |
Thread: | M10 x 50 mm |
Dimensions (L x W x H): | 120 x 120 x 170 mm |
Weight: | 0.5 kg |
10451635 OMNITRONIC XDA-1002 Class D Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 210 W (1/8 power) |
Power output (RMS): | |
stereo 4 ohms | 2 x 510 W |
stereo 8 ohms | 2 x 300 W |
8 ohms bridged | 1 x 1000 W |
Frequency range: | 30-20000 Hz |
Distortion factor: | <0.02 % |
Voltage gain: | 36 dB at 8 ohms |
S/N ratio: | >100 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input sensitivity: | 1.25 V RMS |
Input connectors: | 2 x XLR |
Output connectors: | 2 x Speaker, 2 x XLR feed-through output |
Circuitry: | class D |
Control elements: power switch, level control per channel, mode switch | (stereo/bridged), ground lift switch |
LED indicators: | Protect, limit, signal, power |
Protection circuits: | Short-circuit, overheat, DC voltage, power on/off |
transients, softstart | |
Construction: | steel chassis |
Dimensions (DxWxH): | 240 x 483 x 44 mm (19", 1 U) |
Weight: | 4 kg |
10451636 OMNITRONIC XDA-2402 Class D Amplifier | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 465(1/8 power) |
Power output (RMS): | |
stereo 4 ohms | 2 x 1200 |
stereo 8 ohms | 2 x 880 |
Frequency range: | 30-20000 Hz |
Distortion factor: | <0.02 % |
Voltage gain: | 36 dB at 8 ohms |
S/N ratio: | >100 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input sensitivity: | 1.25 V RMS |
Input connectors: | 2 x XLR |
Output connectors: | 2 x Speaker, 2 x XLR feed-through output |
Circuitry: | class D |
Control elements: | power switch, level control per channel, ground lift switch |
LED indicators: | Protect, limit, signal, power |
Protection circuits: | Short-circuit, overheat, DC voltage, power on/off |
transients, softstart | |
Construction: | steel chassis |
Dimensions (DxWxH): | 355 x 483 x 44 mm (19", 1 U) |
Weight: | 6.4 kg |
OMNITRONIC Set 2x ARM-6.5 studio monitor + 2x MO-1 stand
2x 60004200: OMNITRONIC MO-1 Monitor Stand
2x 11036458: OMNITRONIC ARM-6.5 2-Way Studio Monitor
60004200 OMNITRONIC MO-1 Monitor Stand
- Monitor stand, extendible from 93-148 cm, max. load 18 kg
- Especially useful for studio monitors
- Adustable height
- The telescopic tube is additionally secured via autolock safety-pin
- Made of steel
11036458 OMNITRONIC ARM-6.5 2-Way Studio Monitor
- Active 2-way reference studio monitor with ribbon transducer and Kevlar woofer
- 2-way active speaker system for studio and multimedia applications
- Crystal clear and precise listening experience through built-in 5 cm velocity ribbon tweeter (2") with wave guide
- 16.5 cm bass-midrange speaker (6.5") with Kevlar cone delivers rich and defined lows
- Separate power amplifiers for bass speaker and tweeter (bi-amping) with efficient class AB circuitry, ensuring serious dynamic headroom
- Low weight due to integrated switch mode power supply
- Extensive controls for adjustment to various acoustic conditions
- Click type rotary volume control at front for precise level adjustment
- Equipped with an unbalanced RCA input and a balanced XLR input and a 6.3 mm jack input
- High-quality MDF cabinet (15 mm) with front acoustic port and optimized internal bracing
- Black high-gloss surface
60004200 OMNITRONIC MO-1 Monitor Stand | |
Maximum load: | 18 kg |
Mounting area: | 0.2 x 0.22 m |
Adjustable height: | 0.93-1.48 m |
Base area: | 0.4 x 0.4 m |
Weight: | 4 kg |
11036458 OMNITRONIC ARM-6.5 2-Way Studio Monitor | |
Power supply: | 100-240 V AC 50/60 Hz |
Power consumption: | 42 W (1/8 power) |
LF amplifier power: | 60 W |
HF amplifier power: | 20 W |
Circuitry: | class A/B |
Components: | 16.5 cm bass-midrange speaker (6.5") with Kevlar cone and 5 cm ribbon tweeter (2") with wave guide |
Connection: | RCA, unbal. |
6.3 mm jack, bal./unbal. | |
XLR, bal. | |
Frequency range: | 45-22000 Hz |
Crossover frequency: | 2.8 kHz |
S/N ratio: | >95 dB |
Maximum SPL: | 102 dB |
Input sensitivity: | 85 mV |
Input impedance: | 10/20 kohms (bal./unbal.) |
Room compensation: | 0 dB, -2 dB, -4 dB, switchable |
HF adjustment: | -2 dB, 0 dB, +2 dB, switchable |
Low Cut: | Flat, 80 Hz, 100 Hz, switchable |
LED indication: | Blue for power on and red for off/standby |
Protection: | Output current limiting, over temperature, power on/off transient, subsonic filter, external mains fuse |
Dimensions (L x W x H): | 275 x 230 x 358 mm |
Weight: | 7 kg |
OMNITRONIC Set 2x M-2 Speaker system stand + Carrying bag
2x 60004182: OMNITRONIC M-2 Speaker-System Stand
1x 6000490N: OMNITRONIC Carrying Bag for two Speaker Stands
60004182 OMNITRONIC M-2 Speaker-System Stand
- Simple speaker stand, extendible up to 170 cm, max. load 30 kg
- Stable speaker stand for mobile use
- The telescopic tube is additionally fixed with a safety pin
6000490N OMNITRONIC Carrying Bag for two Speaker Stands
- Bag with 120 x 15 x 15 cm dimensions for speaker stands
- For two speaker stands
- Two more bags inside the bag
60004182 OMNITRONIC M-2 Speaker-System Stand | |
Maximum load: | 30 kg |
Minimum height: | 1.00 m |
Maximum height: | 1.70 m |
Material: | Steel |
Weight: | 3.2 kg |
6000490N OMNITRONIC Carrying Bag for two Speaker Stands | |
Outside bag (W x D x H): | 120 x 25 x 15 cm |
Inside bags (W x D x H): | 120 x 15 x 15 cm |
OMNITRONIC Set 2x Speaker system stand alu black + Carrying bag
2x 60004120: OMNITRONIC Speaker System Stand alu bk
1x 6000490N: OMNITRONIC Carrying Bag for two Speaker Stands
60004120 OMNITRONIC Speaker System Stand alu bk
- High-quality speaker stand
- Stable speaker stand for mobile use
- The telescopic tube is additionally fixed with a safety pin
6000490N OMNITRONIC Carrying Bag for two Speaker Stands
- Bag with 120 x 15 x 15 cm dimensions for speaker stands
- For two speaker stands
- Two more bags inside the bag
60004120 OMNITRONIC Speaker System Stand alu bk | |
Maximum load: | 30 kg |
Maximum load (DIN15560): | 18 kg |
Minimum height: | 1.40 m |
Maximum height: | 2.20 m |
Weight: | 3 kg |
6000490N OMNITRONIC Carrying Bag for two Speaker Stands | |
Outside bag (W x D x H): | 120 x 25 x 15 cm |
Inside bags (W x D x H): | 120 x 15 x 15 cm |
OMNITRONIC Set 2x XKB-212A + 2x MagiCarpet-151A MK2
2x 11038795: OMNITRONIC XKB-212A 2-Way Speaker, active, DSP
2x 11037408: OMNITRONIC MagiCarpet-151A MK2 Active Subwoofer
2x 60004552: OMNITRONIC Distance Tube Subwoofer/Satellite 100cm
2x 3022069M: OMNITRONIC Speaker cable XLR 2x1.5 3m bk
2x 3022055N: OMNITRONIC XLR cable 3pin 10m bk
11038795 OMNITRONIC XKB-212A 2-Way Speaker, active, DSP
- Active speaker with 12" woofer, 1,35" driver, LF: 300 W RMS, HF: 60 W RMS
- Active 12/2 full range system for mobile live and DJ applications
- DSP-controlled biamp amplifier (LF class D, HF class A/B)
- Application presets for quick sound contouring:
- - LIVE (linear adjustment)
- - MUSIC (slight low and high frequency boost)
- - SPEECH (optimized speech intelligibility)
- - DJ (increased presence and bass)
- - TRIPOD (for stand mounting)
- - MONITOR (for use as a floor monitor)
- - WALL (for wall mounting)
- 24-bit DSP with adjustable high-pass filter, parametric 3-band EQ and signal delay
- Built-in Bluetooth player for audio streaming from compatible Bluetooth devices such as smartphones, tablets and notebooks
- 2-way bassreflex enclosure with 30 cm woofer and 3.5 cm titanium driver
- Alphanumeric LCD with blue backlight
- 2 mic/line inputs (XLR/6.3 mm jack) with separate level controls
- Parallel XLR output for linking further active speaker systems
- Limiter for overload protection
- Master volume/DSP push control
- Power, signal and limit LED
- Stable plastic housing with protective grille and handles
- 36 mm flange for stand installation
- Applications: standing, as floor monitor, on a speaker stand or wall holder
11037408 OMNITRONIC MagiCarpet-151A MK2 Active Subwoofer
- Active bassreflex subwoofer (15") with 250 watts power
- Active bassreflex subwoofer with 250 W RMS power
- 38 cm bass speaker (15") with 76 mm voice coil
- Adjustable XLR input with feed-through output
- XLR output with high-pass filter for active top speakers
- Adjustable crossover frequency from 40 to 250 Hz
- Bass boost, ground lift and phase control
- Power and signal/limit indicator
- Rugged wooden housing with black felt cover
- Metal flange for mounting top speakers
- Bar handles for easy transport
- Impact-resistant metal grille, steel corners and support feet
- For mobile applications and permanent installations
- Suitable for car transport
60004552 OMNITRONIC Distance Tube Subwoofer/Satellite 100cm
- Distance tube
- Connecting tube for satellite systems
- For stand inserts with standard diameter (35 mm)
- Powder-coated steel version
- Available in different sizes
- Color: black
3022069M OMNITRONIC Speaker cable XLR 2x1.5 3m bk
- Speaker-cable
- Suitable for all passive speaker-systems with XLR socket
- 1.5 mm² thick cores for amplified signals without signal loss
- Not to be used as microphone cable!
3022055N OMNITRONIC XLR cable 3pin 10m bk
11038795 OMNITRONIC XKB-212A 2-Way Speaker, active, DSP | |
Power supply: | 100-240 V AC, 50/60 Hz |
Amplifier power: | 300 W RMS LF, 60 W RMS HF |
LF speaker: | 30 cm bass/mids (12") with 60 mm voice coil |
HF speaker: | 35 mm driver (1.35") |
Inputs mic/line: | combination XLR/6.3 mm jack, bal. |
Parallel output: | XLR, bal. |
Sensitivity: | 95 dB |
Frequency range: | 55-20000 Hz |
Dimensions (H x W x D): | 350 x 380 x 610 mm |
Weight: | 15 kg |
11037408 OMNITRONIC MagiCarpet-151A MK2 Active Subwoofer | |
Power supply: | 230 V AC, 50 Hz |
Power consumption: | 280 W |
Rated power: | 250 W RMS |
Program power: | 1000 W peak |
Woofer: | 38 cm (15") |
Signal input: | XLR L/R |
Signal output: | XLR L/R |
Maximum SPL: | 125 dB |
Frequency range: | 40-250 Hz |
Acoustic loading: | Bassreflex |
Dimensions (W x D x H): | 515 x 520 x 635 mm |
Weight: | 30 kg |
60004552 OMNITRONIC Distance Tube Subwoofer/Satellite 100cm | |
Maximum load: | 35 kg |
Height: | 100 cm |
Weight: | 0.8 kg |
3022069M OMNITRONIC Speaker cable XLR 2x1.5 3m bk | |
Cable length: | 3 m |
Color: | Black |
Plug A: | 1 x 3-pole XLR (M) |
Plug B: | 1 x 3-pole XLR (F) |
3022055N OMNITRONIC XLR cable 3pin 10m bk | |
Cable length: | 10 m |
Color: | Black |
Plug A: | 1 x 3-pole XLR (M) |
Plug B: | 1 x 3-pole XLR (F) |
OMNITRONIC Set 2x XKB-212A + Speaker Stand MOVE MK2
2x 11038795: OMNITRONIC XKB-212A 2-Way Speaker, active, DSP
1x 60004023: OMNITRONIC Speaker Stand MOVE MK2 set
2x 3022055N: OMNITRONIC XLR cable 3pin 10m bk
11038795 OMNITRONIC XKB-212A 2-Way Speaker, active, DSP
- Active speaker with 12" woofer, 1,35" driver, LF: 300 W RMS, HF: 60 W RMS
- Active 12/2 full range system for mobile live and DJ applications
- DSP-controlled biamp amplifier (LF class D, HF class A/B)
- Application presets for quick sound contouring:
- - LIVE (linear adjustment)
- - MUSIC (slight low and high frequency boost)
- - SPEECH (optimized speech intelligibility)
- - DJ (increased presence and bass)
- - TRIPOD (for stand mounting)
- - MONITOR (for use as a floor monitor)
- - WALL (for wall mounting)
- 24-bit DSP with adjustable high-pass filter, parametric 3-band EQ and signal delay
- Built-in Bluetooth player for audio streaming from compatible Bluetooth devices such as smartphones, tablets and notebooks
- 2-way bassreflex enclosure with 30 cm woofer and 3.5 cm titanium driver
- Alphanumeric LCD with blue backlight
- 2 mic/line inputs (XLR/6.3 mm jack) with separate level controls
- Parallel XLR output for linking further active speaker systems
- Limiter for overload protection
- Master volume/DSP push control
- Power, signal and limit LED
- Stable plastic housing with protective grille and handles
- 36 mm flange for stand installation
- Applications: standing, as floor monitor, on a speaker stand or wall holder
60004023 OMNITRONIC Speaker Stand MOVE MK2 set
- 2 high-quality stands, extendible up to 185 cm, max. load 18 kg + bag
- Stable speaker stand for mobile use
- The telescopic tube is additionally fixed with a safety pin
- Set consisting of 2 x speaker stands with safety pin
- Carrying bag included in delivery
3022055N OMNITRONIC XLR cable 3pin 10m bk
11038795 OMNITRONIC XKB-212A 2-Way Speaker, active, DSP | |
Power supply: | 100-240 V AC, 50/60 Hz |
Amplifier power: | 300 W RMS LF, 60 W RMS HF |
LF speaker: | 30 cm bass/mids (12") with 60 mm voice coil |
HF speaker: | 35 mm driver (1.35") |
Inputs mic/line: | combination XLR/6.3 mm jack, bal. |
Parallel output: | XLR, bal. |
Sensitivity: | 95 dB |
Frequency range: | 55-20000 Hz |
Dimensions (H x W x D): | 350 x 380 x 610 mm |
Weight: | 15 kg |
60004023 OMNITRONIC Speaker Stand MOVE MK2 set | |
Maximum load: | 18 kg |
Min. Height: | 1000 mm |
Max. Height: | 1850 mm |
Weight: | 2.5 kg |
3022055N OMNITRONIC XLR cable 3pin 10m bk | |
Cable length: | 10 m |
Color: | Black |
Plug A: | 1 x 3-pole XLR (M) |
Plug B: | 1 x 3-pole XLR (F) |